Bananian

mSATA Keepts resetting

4 1477

HI,

I have tried Samsung 840 and Toshiba 2D35 and on two different BananaPIs and using two different power supplies one of which has been powering my RaspPi for a few months.

After installing bananian and hooking up the mSata drives. I can mount them etc but I do get errors when copying large amounts of data, I see this in messages and I hear the Toshiba drive shutdown and startup.

Any ideas please? Thanks

Dec 26 12:55:56 downloadpi kernel: [   44.032992] ata1: hard resetting link
Dec 26 12:55:58 downloadpi kernel: [   45.543845] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 26 12:55:58 downloadpi kernel: [   45.555903] ata1.00: configured for UDMA/100
Dec 26 12:55:58 downloadpi kernel: [   45.562404] ata1: EH complete
Dec 26 12:56:15 downloadpi kernel: [   62.678169] ata1: limiting SATA link speed to 1.5 Gbps
Dec 26 12:56:15 downloadpi kernel: [   62.717713] ata1: hard resetting link
Dec 26 12:56:17 downloadpi kernel: [   64.173852] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Dec 26 12:56:17 downloadpi kernel: [   64.185899] ata1.00: configured for UDMA/100
Dec 26 12:56:17 downloadpi kernel: [   64.192407] ata1: EH complete
Dec 26 12:56:34 downloadpi kernel: [   81.378036] ata1: hard resetting link
Dec 26 12:56:35 downloadpi kernel: [   82.893848] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Dec 26 12:56:35 downloadpi kernel: [   82.905816] ata1.00: configured for UDMA/100
Dec 26 12:56:35 downloadpi kernel: [   82.912317] ata1: EH complete
Dec 26 12:56:52 downloadpi kernel: [  100.045580] ata1: hard resetting link
Dec 26 12:56:54 downloadpi kernel: [  101.503821] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Dec 26 12:56:54 downloadpi kernel: [  101.515596] ata1.00: configured for UDMA/100
Dec 26 12:56:54 downloadpi kernel: [  101.522018] ata1: EH complete
Dec 26 12:57:11 downloadpi kernel: [  118.710135] ata1: hard resetting link
Dec 26 12:57:13 downloadpi kernel: [  120.223850] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Dec 26 12:57:13 downloadpi kernel: [  120.235794] ata1.00: configured for UDMA/100
Dec 26 12:57:13 downloadpi kernel: [  120.242306] ata1: EH complete
tkaiser  
Search the forum for »AXP209 current voltage awk« (ways to read out the current/voltage available to the BPi's PMU) and try to power your HDDs externally to get a clue whether it's a electrical problem. Maybe you have just a bad SATA data cable or damaged SATA connectors. In this case I would have a look at the SMART values for attribute 199 (CRC errors between SATA host and drive)

Thanks tkaiser I did power it via another external supply and its the same. I also changed the cables.

I will search for the AXP209
Thanks again

Try changing to another ssd

hodoors  
Note: The author has been banned or deleted.

You have to log in before you can reply Login | Sign Up

Points Rules