Trouble

SSH remote connection problem Banana PRO eth0 and wlan0

2 2238
mmax  
Im experiencing an maybe a driver issue, that I cannot connect via SSH, when wlan0 is running.

When I have these lines in /etc/network/interface

auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ap-scan 1
wpa-scan-ssid 1
wpa-ssid "xxxx"
wpa-psk "xxxxxxxxxx"

wifi seems to work (ping, samba) but SSH not (Ive tried putty and also other linux machine). SSH hangs up after password typing and confirming. No command line shows.
When I connect to bpro with monitor and keybord and type "who" command I can see that the connection is established, but on the client side is nothing.

I tried also Bananian and Raspbian with same results.
a1d3s  
Only the 4 lines needed
auto wlan0
iface wlan0 inet dhcp
wpa-ssid "xxxx"
wpa-psk "xxxxxxxxxx"

mmax  
a1d3s replied at Sat Jan 24, 2015 00:20
Only the 4 lines needed
auto wlan0
iface wlan0 inet dhcp

I´ve tried all combinations of commenting and uncommenting lines, still the same.

Someone else has similar issue here:
http://forum.lemaker.org/thread- ... eth0_and_wlan0.html

But he has static IPs

You have to log in before you can reply Login | Sign Up

Points Rules