Android image for 6 Realtek WLAN-Sticks and switch the default Audio output

liab

@hoangdinh86
I format a 8 GB CnMemory Spaceloop with Partition-Editor in ntfs.
After inserting the stick, android mount it perfect as ntfs (fuseblk):

/dev/block/vold/8:17 /mnt/usbhost2 fuseblk rw,noatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0
root@android:/mnt/usbhost2 #

ls shows my testfile:
root@android:/mnt/usbhost2 # ls
Textdatei
root@android:/mnt/usbhost2 #

Please try another stick.

hoangdinh86

Yes. Usb stick with Fat format is showed in File explorer Android but Ntfs format is not,i tried 3 times with three different sticks. Thank

liab

@hoangdinh86

I tested a NTFS Stick with File Manager, ES File Explorer, FileManager and SambaDroid, here all no problem. You found the stick under /mnt/usbhostx and usbhostx. With FileManager you found it in Usb.

Show me the log from the mount command.

hoangdinh86

root@android:/ # mount
rootfs / rootfs ro,relatime 0 0
devtmpfs /cub/block devtmpfs rw,relatime,size=404936k,nr_inodes=101234,mode=755 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0@
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/system /system ext4 ro,relatime,nobarrier,data=ordered 0 0
/dev/block/private /mnt/private vfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=ascii,shortname=mixed,errors=continue 0 0
/dev/block/data /data ext4 rw,nosuid,nodev,noatime,journal_checksum,noauto_da_alloc,data=ordered 0 0
/dev/block/cache /cache ext4 rw,nosuid,nodev,noatime,journal_checksum,noauto_da_alloc,data=ordered 0 0
/dev/block/vold/179:1 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,noatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=ascii,shortname=mixed,utf8,errors=continue 0 0
/dev/block/vold/179:1 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,noatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=ascii,shortname=mixed,utf8,errors=continue 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
root@android:/ #

I tried again but not success
dmesg log

liab

@hoangdinh86
Your stick is not mounted. If you insert the stick, the console shows this?

root@android:/ # init: untracked pid 3557 exited
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through

My dmesg shows this:

<6>usb 4-1: new high-speed USB device number 2 using sw-ehci
<6>scsi1 : usb-storage 4-1:1.0
<5>scsi 1:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
<6>init: waitpid returned pid 3557, status = 00000000
<3>init: untracked pid 3557 exited
<5>sd 1:0:0:0: [sdb] 15730688 512-byte logical blocks: (8.05 GB/7.50 GiB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
<3>sd 1:0:0:0: [sdb] No Caching mode page present
<3>sd 1:0:0:0: [sdb] Assuming drive cache: write through
<3>sd 1:0:0:0: [sdb] No Caching mode page present
<3>sd 1:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb: sdb1
<3>sd 1:0:0:0: [sdb] No Caching mode page present
<3>sd 1:0:0:0: [sdb] Assuming drive cache: write through
<5>sd 1:0:0:0: [sdb] Attached SCSI removable disk
<7>cpu up:1
<7>CPU1: Booted secondary processor
<5>CPU1: shutdown

In your dmesg is a "failed". Try a short usb extension cable, the bpi usb connectors sometimes make problems.

hoangdinh86

@liab
Finally,It works but dont know why maybe I change usb port or power adapter. Thank you so much.

liab

hoangdinh86 replied at Thu Mar 19, 2015 17:18
@liab
Finally,It works but dont know why maybe I change usb port or power adapter. Thank you so much ...

Fine, I'm happy.

franklee

@liab: thanks for your image 170315, it's great.. No need to do a kernel compile myself, droidmote server is running ok now..

Anasrocks

liab replied at Tue Mar 17, 2015 19:42
Sorry, only these six chips:

root@android:/ # wlan

Hello liab,

the drivers for the RTL8188CUS are available on realtek website with wpa files, it would be a great boost to the forum if you could compile a version of android to this wireless chipset as i have noticed everyone is asking for. Thank you for you great work

liab

Anasrocks replied at Mon Mar 30, 2015 12:08
Hello liab,

the drivers for the RTL8188CUS are available on realtek website with wpa files, it wo ...

You tried it with the driver 8192cu? I saw on the Realtek HP, the 8188cus and 8192cu is the same driver. May be some things in android must adjust.