Lubuntu

HDMI monitor output

0 1805
Roy360  
Edited by Roy360 at Thu Apr 9, 2015 19:22

I'm trying to get my BananaPI to work with my Dell U2312HM 1920x1080p monitors

I'm using a DVI to HDMI adapter to connect it. Monitor, adapter and wire have already been tested.


I recently got NTSC composite working, but I can't stand the resolution and the choppiness of my capture card so HDMI is a must.

I'm considering an AOC USB monitor, but I haven't heard good things about Linux's display link drivers


Problem: when I connect my PI to my computer screen, the detect detects an input signal but displays nothing (monitor light is in blue so it is not in sleep mode).

NOTE: My Sharp TV works perfectly with the PI in dot by dot mode, and my Sony TV works as-well(however there is overscan)

Here's my script.bin
[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 3
screen0_output_mode = 10
screen1_output_type = 2
screen1_output_mode = 14
fb0_framebuffer_num = 2
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 1
fb1_framebuffer_num = 2
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
lcd0_backlight = 197
lcd1_backlight = 197
lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50
lcd1_bright = 50
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50

[lcd0_para]
lcd_used = 0
lcd_x = 1024
lcd_y = 600
lcd_dclk_freq = 55
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 22000
lcd_pwm_pol = 0
lcd_max_bright = 240
lcd_min_bright = 64
lcd_if = 3
lcd_hbp = 150
lcd_ht = 1344
lcd_vbp = 20
lcd_vt = 1270
lcd_vspw = 10
lcd_hspw = 50
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_lvds_ch = 0
lcd_lvds_mode = 0
lcd_lvds_bitwidth = 0
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 0
lcd_io_cfg0 = 268435456
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0x0
lcd_gamma_tbl_1 = 0x10101
lcd_gamma_tbl_255 = 0xffffff
lcd_bl_en_used = 1
lcd_bl_en = portH07<1><0><default><1>
lcd_power_used = 1
lcd_power = portH08<1><0><default><1>
lcd_pwm_used = 1
lcd_pwm = portB02<2><0><default><default>
lcdd0 = portD00<3><0><default><default>
lcdd1 = portD01<3><0><default><default>
lcdd2 = portD02<3><0><default><default>
lcdd3 = portD03<3><0><default><default>
lcdd4 = portD04<3><0><default><default>
lcdd5 = portD05<3><0><default><default>
lcdd6 = portD06<3><0><default><default>
lcdd7 = port:PD07<3><0><default><default>
lcdd8 = port:PD08<3><0><default><default>
lcdd9 = port:PD09<3><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><3><default>
lcdhsync = port:PD26<2><0><3><default>
lcdvsync = port:PD27<2><0><3><default>
You have to log in before you can reply Login | Sign Up

Points Rules