Is it dead?

11 2254
tkaiser replied at Mon Jun 22, 2015 15:08
And you're also sure you used the correct Micro-USB-connector to power the board (the one between  ...

Thank your for reply. Tried all the ways, with SD card and without, on OTG port and normal power port, there is no red LED in any combination.

Did you try that micro usb cable and adapter to power another board?

Or a power hungry tablet?

If you can verify that the cable is good, and the power supply is good (ie test both on another device, you cannot assume they are good just because they are new) then you have a very dead Banana on your hands.

You have to log in before you can reply Login | Sign Up

Points Rules