BananaPI no AV signal, no video signal

angelocam

Hi,
I have installed on 8Gb SD the image downloaded from your page.
First I have tried with Lubuntu V3. Note the checksum SHA1 of the tgz file is equal to reported on your download page.
BPI powered and the red led is ON the green led blinking but on AV OUT isn't present video signal.
Second I have tried with Lubuntu V2. checksum SHA1 OK.
BPI powered and the red led is ON the green led in OFF but on AV OUT isn't present video signal.

Please HELP me! thanks

Raymond

I saw this page may help.

http://wiki.lemaker.org/index.ph ... n#Porting_AV_driver
AV driver has been included in the kernel, just config the script.fex directly:

angelocam

OK, thanks for your response
but I'm not expert. I have a few questions:
I find a script.fex file in a SD? I edit this with a simple text editor and copy all indicated on "Porting AV driver" text box? After this operation I lost the HDMI output?

angelocam

Raymon thanks you for your suggestion,
I have studied the bin2fex and fex2bin procedure and with success have upgraded the script.bin original file of the SD.
But I have another question: it's possible insert the AV and the DVI configuration at the same time? If it's possible is perfect, because isn't necessary every time substitute the script.bin file.