Interfacing

LIRC Support

15 9559
ezio204 replied at 2014-10-2 07:44
I know the Module on the board is for Receiving but i use an IR Sending Diode :

And i want to send  ...

Hi,

how did you get the module lirc_rpi  running? On kernel 3.4.90, it cannot be loaded, because it's missing...

Magichand replied at 2014-10-16 15:08
Hi,

how did you get the module lirc_rpi  running? On kernel 3.4.90, it cannot be loaded, because  ...

lirc_rpi is for raspberry pi driver, not for banana pi

tony_zhang replied at 2014-10-17 03:17
lirc_rpi is for raspberry pi driver, not for banana pi

Hi,

I was just wondering cause eizo204 wrote above, that he's using this module...

I'm facing the same problem, I want to use the gpio's with lirc, but it seems that nobody has get this working yet and I don't have any idea how to get lirc to the gpio's together

I have make LIRC work by following http://wiki.lemaker.org/FAQ Q15, but I also found that not all IR sender can work, I have 3 IR sender, but only one can be detected by Banana Pi.

nka11  
maybe you could try this : https://github.com/matzrh/sunxi-lirc/wiki

And this seems to have useful code too : https://github.com/wknightbor/CirSunxi

Regards

I've followed your links, but my knowledge about handling modules isn't good enough to get their code into my system for testing... so I'll have to wait for someone who better knows what to do with the code from these gyus...

But thanks you for your help...

Regards

You have to log in before you can reply Login | Sign Up

Points Rules