Bananian

BPi-R1 - PPPoE - drives me nuts

1 1204
nebkas  
Edited by nebkas at Fri Sep 25, 2015 16:47


Hello,

may I find here some help. I'm trying to get PPPoE working on my BPi-R1

State of things:

My BPi-R1 connects successfully to the internet. I can ping download etc. things direct on the BPi-R1. For the connection I use a second bridge br1 with VLAN eth0.101. So, this works fine. But I cant bring my clients to use the internet connection from the BPi-R1. I can Ping my Clients from BPi-R1 and from my clients I can ping all bridges etc. When I try to ping from a client may to google.com the client shows me the IP Adress from google.com but then nothing ans loses al packages. So I cant connect full to the internet by my Clients.

It would be nice to find some Help.

Thx
# interfaces(5) file used by ifup(8) and ifdown(8)
# auto <interface> - Start the interface(s) at boot.

allow-hotplug eth0
allow-hotplug wlan0

##### loopback #####
auto lo
iface lo inet loopback


##### VLAN eth0.101 #####
auto eth0.101
iface eth0.101 inet static

        vlan-raw-device eth0

                address 192.168.178.2
                netmask 255.255.255.0

##### VLAN eth0.102
auto eth0.102
iface eth0.102 inet manual


##### WLAN #####
auto wlan0
iface wlan0 inet manual

        post-down rm -rf /run/hostapd/wlan0


##### Bridge br0 #####
auto br0
iface br0 inet static

        bridge_ports eth0.102 wlan0
        bridge_waitport 0
                address 192.168.1.2
                netmask 255.255.255.0

##### Bridge br1 #####
auto br1
iface br1 inet static

        bridge_ports eth0.101
        bridge_waitport 0
               address 192.168.1.3
               netmask 255.255.255.0



nebkas  
Damn! Problem solved I wonde where is the 'edit' button gone to change topic to solved?

anyway, thread can be deleted.

If someone is interested in a how-to, just let me know

You have to log in before you can reply Login | Sign Up

Points Rules