How to connect to the remote Guitar based on the RDP protocol

0 1199
Edited by hnsncxy at Nov 09, 2015 03:13

I have tried to connect the Guitar based on the RDP protocol on the Lemuntu system, and it can work .  Here are the detailed steps:

1. Configure the RDP Server on the Lemuntu
In order to enable RDP Server and  you have to install the following packages.
  1. sudo apt-get install xrdp
  2. sudo apt-get install tightvncserver
Copy the Code
Run xrdp service when the system startup
  1. sudo systemctl enable xrdp
Copy the Code
Reboot your system
  1. sudo reboot
Copy the Code

2. Connect the RDP Server on the Window 8.1 System
(1). Open the run command window,then type "mstsc" and enter, as follows

(2). Type the IP address of the Lemuntu system, then click the "connect", as follows

(3). Type your acount for the Lemuntu, as follows

(4). Clink "OK", and you will view the remote connection successfully.

You have to log in before you can reply Login | Sign Up

Points Rules