Other Projects

Use Arduino1.5 at Banana Pi to Connect Arduino Uno

1 6345
I have installed the Arduino1.5.4 on Banana Pi, and use it to upload program to UNO. I tested the Blink example successfully.

When we use the Arduino1.5.4 we may encounter the problem that the  Arduino1.5.4  couldn't identify UNO port /dev/ttyACM0.
For solve this problem, we can follow the solution below.

To check if the /dev/ttyACM0 exists:
  1. ls -l /dev/tty*
Copy the Code
If we can see /dev/ttyACM0, the we should link it to another port such /dev/ttyUSB0:
  1. sudo ln -s /dev/ttyACM0 /dev/ttyUSB0
Copy the Code
Then we can check the link:
  1. ls -l /dev/tty*
Copy the Code

And now restart Arduino1.5.4, then it can identify the UNO port as /dev/ttyUSB0
So convenient!

You have to log in before you can reply Login | Sign Up

Points Rules