Other OS

Mainline kernel on Banana Pro hangs at 'booting the kernel...'

0 1003
I'm using Igor's image Armbian_4.5_Bananapi_Debian_jessie_4.2.3 on Banana Pro
Upon boot it hangs at "Uncompressing Linux... done, booting the kernel."

What is going wrong?


Complete log:

CPU:   Allwinner A20 (SUN7I)
I2C:   ready
DRAM:  1 GiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   eth0: ethernet@01c50000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
Hit any key to stop autoboot:  0
6944 bytes read in 173 ms (39.1 KiB/s)
RLE Bitmap unsupported in video mode 0xea000016
bmp - manipulate BMP image data

bmp info <imageAddr>          - display image info
bmp display <imageAddr> [x y] - display image at x,y
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
1973 bytes read in 202 ms (8.8 KiB/s)
## Executing script at 43100000
0 bytes read in 121 ms (0 Bytes/s)
27145 bytes read in 580 ms (44.9 KiB/s)
5468416 bytes read in 525 ms (9.9 MiB/s)
Kernel image @ 0x46000000 [ 0x000000 - 0x537100 ]
## Flattened Device Tree blob at 49000000
   Booting using the fdt blob at 0x49000000
   Using Device Tree in place at 49000000, end 49009a08

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

You have to log in before you can reply Login | Sign Up

Points Rules