Other OS

ArchLinux wifi module

2 2223
xxemre  
Hi,

I am trying to load the kernel module for ap6210 on banana pro running ArchLinux. I can load the module -after- boot, manually

  1. sudo modprobe ap6210
Copy the Code

this works perfectly. I added ap6210 to /etc/modules, but it is not loading at boot time. Every time I have to manually load it. My dmesg output is as follows:




  1. [    0.000000] Booting Linux on physical CPU 0
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.4.103-eldajani+ (rel@gs70) (gcc version 4.9.1 (GCC) ) #0 SMP PREEMPT Thu Feb 5 15:42:33 CET 2015
  5. [    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [    0.000000] Machine: sun7i
  8. [    0.000000] Memory Reserved:
  9. [    0.000000]         SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
  10. [    0.000000]         VE   : 0x44000000 - 0x48ffffff  (  80 MB)
  11. [    0.000000]         G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
  12. [    0.000000]         LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
  13. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  14. [    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  15. [    0.000000] On node 0 totalpages: 262144
  16. [    0.000000] free_area_init_node: node 0, pgdat c0a19340, node_mem_map d0000000
  17. [    0.000000]   DMA zone: 512 pages used for memmap
  18. [    0.000000]   DMA zone: 0 pages reserved
  19. [    0.000000]   DMA zone: 65024 pages, LIFO batch:15
  20. [    0.000000]   Normal zone: 1008 pages used for memmap
  21. [    0.000000]   Normal zone: 128016 pages, LIFO batch:31
  22. [    0.000000]   HighMem zone: 528 pages used for memmap
  23. [    0.000000]   HighMem zone: 67056 pages, LIFO batch:15
  24. [    0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768
  25. [    0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
  26. [    0.000000] pcpu-alloc: [0] 0 [0] 1
  27. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
  28. [    0.000000] Kernel command line: console=ttyS0,115200 consoleblank=0 console=tty0 disp.screen0_output_mode=1920x1080p60:EDID hdmi.audio=EDID:0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  29. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  30. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  31. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  32. [    0.000000] allocated 2097152 bytes of page_cgroup
  33. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  34. [    0.000000] Memory: 1024MB = 1024MB total
  35. [    0.000000] Memory: 894076k/894076k available, 154500k reserved, 270336K highmem
  36. [    0.000000] Virtual kernel memory layout:
  37. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  38. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  39. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  40. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  41. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  42. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  43. [    0.000000]       .text : 0xc0008000 - 0xc096f984   (9631 kB)
  44. [    0.000000]       .init : 0xc0970000 - 0xc09ab040   ( 237 kB)
  45. [    0.000000]       .data : 0xc09ac000 - 0xc0a211c8   ( 469 kB)
  46. [    0.000000]        .bss : 0xc0a211ec - 0xc0bf0fd8   (1856 kB)
  47. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  48. [    0.000000] Preemptible hierarchical RCU implementation.
  49. [    0.000000]         RCU dyntick-idle grace-period acceleration is enabled.
  50. [    0.000000]         Additional per-CPU info printed with stalls.
  51. [    0.000000] NR_IRQS:192
  52. [    0.000000] Architected local timer running at 24.00MHz.
  53. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  54. [    0.000000] start_kernel(): bug: interrupts were enabled early
  55. [    0.000000] Console: colour dummy device 80x30
  56. [    0.000000] console [tty0] enabled
  57. [    0.013736] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
  58. [    0.075992] pid_max: default: 32768 minimum: 301
  59. [    0.079663] Mount-cache hash table entries: 512
  60. [    0.083855] Initializing cgroup subsys cpuacct
  61. [    0.087191] Initializing cgroup subsys memory
  62. [    0.090623] Initializing cgroup subsys devices
  63. [    0.094070] Initializing cgroup subsys freezer
  64. [    0.097305] Initializing cgroup subsys blkio
  65. [    0.100988] Initializing cgroup subsys perf_event
  66. [    0.104576] CPU: Testing write buffer coherency: ok
  67. [    0.109762] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  68. [    0.116874] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  69. [    0.122428] Setting up static identity map for 0x406c3b60 - 0x406c3bb8
  70. [    0.238678] CPU1: Booted secondary processor
  71. [    0.297307] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  72. [    0.299308] Brought up 2 CPUs
  73. [    0.304645] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
  74. [    0.307837] devtmpfs: initialized
  75. [    0.313316] dummy:
  76. [    0.317002] NET: Registered protocol family 16
  77. [    0.323220] DMA: preallocated 256 KiB pool for atomic coherent allocations
  78. [    0.330894] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  79. [    0.335726] hw-breakpoint: maximum watchpoint size is 8 bytes.
  80. [    0.338888] [ccu-inf] aw clock manager init
  81. [    0.341167] [ccu-inf] aw_ccu_init
  82. [    0.345127] [ccu-inf] script config pll3 to 297MHz
  83. [    0.348888] [ccu-inf] script config pll4 to 300MHz
  84. [    0.352645] [ccu-inf] script config pll6 to 600MHz
  85. [    0.356413] [ccu-inf] script config pll7 to 297MHz
  86. [    0.360170] [ccu-inf] script config pll8 to 336MHz
  87. [    0.362942] Init eGon pin module V2.0
  88. [    0.372170] bio: create slab <bio-0> at 0
  89. [    0.375728] sunxi_gpio driver init ver 1.3
  90. [    0.381999] gpiochip_add: registered GPIOs 1 to 86 on device: A1X_GPIO
  91. [    0.385139] SCSI subsystem initialized
  92. [    0.388011] libata version 3.00 loaded.
  93. [    0.392681] usbcore: registered new interface driver usbfs
  94. [    0.397043] usbcore: registered new interface driver hub
  95. [    0.401214] usbcore: registered new device driver usb
  96. [    0.404375] Linux media interface: v0.10
  97. [    0.408010] Linux video capture interface: v2.00
  98. [    0.413724] Advanced Linux Sound Architecture Driver Version 1.0.25.
  99. [    0.419020] Switching to clocksource arch_sys_counter
  100. [    0.421140] FS-Cache: Loaded
  101. [    0.423358] CacheFiles: Loaded
  102. [    0.434434] cfg80211: Calling CRDA to update world regulatory domain
  103. [    0.439134] WRN:L287(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: det_vbus pin is invaild
  104. [    0.446483] WRN:L426(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: check_usb_board_info failed
  105. [    0.454159] WRN:L480(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get_usb_cfg failed
  106. [    0.460352] NET: Registered protocol family 2
  107. [    0.476592] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  108. [    0.483478] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  109. [    0.490937] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  110. [    0.497561] TCP: Hash tables configured (established 131072 bind 65536)
  111. [    0.499760] TCP: reno registered
  112. [    0.504657] UDP hash table entries: 512 (order: 2, 16384 bytes)
  113. [    0.510004] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  114. [    0.513629] NET: Registered protocol family 1
  115. [    0.518832] RPC: Registered named UNIX socket transport module.
  116. [    0.522512] RPC: Registered udp transport module.
  117. [    0.526252] RPC: Registered tcp transport module.
  118. [    0.531654] RPC: Registered tcp NFSv4.1 backchannel transport module.
  119. [    0.537160] audit: initializing netlink socket (disabled)
  120. [    0.540877] type=2000 audit(0.520:1): initialized
  121. [    0.545128] highmem bounce pool size: 64 pages
  122. [    0.556420] VFS: Disk quotas dquot_6.5.2
  123. [    0.561903] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  124. [    0.568889] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  125. [    0.573555] NFS: Registering the id_resolver key type
  126. [    0.578059] NTFS driver 2.1.30 [Flags: R/W].
  127. [    0.581501] fuse init (API version 7.18)
  128. [    0.590698] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  129. [    0.594474] Btrfs loaded
  130. [    0.597303] msgmni has been set to 1218
  131. [    0.604621] alg: No test for stdrng (krng)
  132. [    0.611296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  133. [    0.614231] io scheduler noop registered
  134. [    0.618334] io scheduler deadline registered (default)
  135. [    0.621170] io scheduler cfq registered
  136. [    0.625990] sunxi disp driver loaded (/dev/disp api 1.0)
  137. [    0.631615] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
  138. [    0.639631] [uart]: used uart info.: 0x95
  139. [    0.644377] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  140. [    0.670628] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  141. [    1.298439] console [ttyS0] enabled
  142. [    1.306826] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  143. [    1.338675] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  144. [    1.350497] [uart]: serial probe 4 irq 49 mapbase 0x01c29000
  145. [    1.382303] sunxi-uart.4: ttyS2 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
  146. [    1.394141] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
  147. [    1.425956] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
  148. [    1.435455] G2D: drv_g2d_init
  149. [    1.440156] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  150. [    1.449156] G2D: head:c9000000,tail:ca000000
  151. [    1.456776] G2D: Module initialized.major:250
  152. [    1.469675] brd: module loaded
  153. [    1.478383] loop: module loaded
  154. [    1.485434] gpio count < =0 ,gpio_count is: 0
  155. [    1.495762] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  156. [    1.507005] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  157. [    1.519759] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  158. [    1.534652] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  159. [    1.545430] scsi0 : sw_ahci_platform
  160. [    1.556251] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  161. [    1.567996] Fixed MDIO Bus: probed
  162. [    1.576087] eth%d: device MAC address 02:05:05:41:95:70
  163. [    1.584268] gmac_para gpio count is 18
  164. [    1.589491] [gmac]: sun6i_gmac platform driver registration completed
  165. [    1.592798] PPP generic driver version 2.4.2
  166. [    1.600971] PPP BSD Compression module registered
  167. [    1.609707] PPP Deflate Compression module registered
  168. [    1.618170] NET: Registered protocol family 24
  169. [    1.628389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  170. [    1.640131] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  171. [    1.648708] [sw-ehci1]: open clock
  172. [    1.671329] [sw-ehci1]: Set USB Power ON
  173. [    1.677778] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [    1.691491] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  175. [    1.702931] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  176. [    1.723458] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  177. [    1.734685] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  178. [    1.747664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  179. [    1.761337] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  180. [    1.774136] usb usb1: Manufacturer: Linux 3.4.103-eldajani+ ehci_hcd
  181. [    1.783636] usb usb1: SerialNumber: sw-ehci
  182. [    1.791027] hub 1-0:1.0: USB hub found
  183. [    1.797708] hub 1-0:1.0: 1 port detected
  184. [    1.804215] [sw-ohci1]: open clock
  185. [    1.830308] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  186. [    1.843679] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  187. [    1.855046] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  188. [    1.913464] ata1: SATA link down (SStatus 0 SControl 300)
  189. [    1.928901] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  190. [    1.941885] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  191. [    1.955211] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  192. [    1.967661] usb usb2: Manufacturer: Linux 3.4.103-eldajani+ ohci_hcd
  193. [    1.977161] usb usb2: SerialNumber: sw-ohci
  194. [    1.984573] hub 2-0:1.0: USB hub found
  195. [    1.991217] hub 2-0:1.0: 1 port detected
  196. [    1.997738] [sw-ehci2]: open clock
  197. [    2.020370] [sw-ehci2]: Set USB Power ON
  198. [    2.026852] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  199. [    2.040577] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  200. [    2.052018] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  201. [    2.073456] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  202. [    2.081475] ehci_irq: port change detect
  203. [    2.087214] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  204. [    2.100160] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  205. [    2.113798] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  206. [    2.126570] usb usb3: Manufacturer: Linux 3.4.103-eldajani+ ehci_hcd
  207. [    2.136044] usb usb3: SerialNumber: sw-ehci
  208. [    2.143051] hub 3-0:1.0: USB hub found
  209. [    2.149692] hub 3-0:1.0: 1 port detected
  210. [    2.156228] [sw-ohci2]: open clock
  211. [    2.182331] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  212. [    2.195715] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  213. [    2.207086] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  214. [    2.278894] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  215. [    2.291872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  216. [    2.305191] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  217. [    2.317638] usb usb4: Manufacturer: Linux 3.4.103-eldajani+ ohci_hcd
  218. [    2.327136] usb usb4: SerialNumber: sw-ohci
  219. [    2.334529] hub 4-0:1.0: USB hub found
  220. [    2.341170] hub 4-0:1.0: 1 port detected
  221. [    2.349316] Initializing USB Mass Storage driver...
  222. [    2.359364] usbcore: registered new interface driver usb-storage
  223. [    2.368967] USB Mass Storage support registered.
  224. [    2.378474] mousedev: PS/2 mouse device common for all mice
  225. [    2.389155] input: sunxi-ir as /devices/virtual/input/input0
  226. [    2.396343] IR Initial OK
  227. [    2.401295] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
  228. [    2.412229] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  229. [    2.414847] ehci_irq: port change detect
  230. [    2.423460] i2c /dev entries driver
  231. [    2.430705] config i2c gpio with gpio_config api
  232. [    2.436295] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  233. [    2.447437] axp_mfd 0-0034: AXP internal temperature monitoring enabled
  234. [    2.459128] [AXP]axp driver uning configuration failed(342)
  235. [    2.461080] [AXP]power_start = 0
  236. [    2.464141] I2C: i2c-0: AW16XX I2C adapter
  237. [    2.471633] config i2c gpio with gpio_config api
  238. [    2.474354] The port change to OHCI now!
  239. [    2.477413] I2C: i2c-1: AW16XX I2C adapter
  240. [    2.484809] config i2c gpio with gpio_config api
  241. [    2.488150] I2C: i2c-2: AW16XX I2C adapter
  242. [    2.495653] config i2c gpio with gpio_config api
  243. [    2.498959] I2C: i2c-3: AW16XX I2C adapter
  244. [    2.504871] [ace_drv] start!!!
  245. [    2.507218] [ace_drv] init end!!!
  246. [    2.508885] [pa_drv] start!!!
  247. [    2.511113] [pa_drv] init end!!!
  248. [    2.515206] Driver for 1-wire Dallas network protocol.
  249. [    2.524565] invalid gpio pin in fex configuration : -1
  250. [    2.532119] axp20_ldo1: 1300 mV
  251. [    2.540561] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  252. [    2.550906] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  253. [    2.561052] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  254. [    2.571438] axp20_buck2: 700 <--> 2275 mV at 1450 mV
  255. [    2.582991] somebody is trying to set dcdc3 range to (1300000, 1300000) uV
  256. [    2.594906] but we keep dcdc3 = 1300000 uV from the bootloader
  257. [    2.604995] axp20_buck3: 700 <--> 3500 mV at 1300 mV
  258. [    2.614886] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  259. [    2.629659] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  260. [    2.657697] axp20_ldo2: Failed to create debugfs directory
  261. [    2.668120] device-mapper: uevent: version 1.0.3
  262. [    2.680558] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  263. [    2.685959] usb 4-1: new full-speed USB device number 2 using sw-ohci
  264. [    2.704141] cpuidle: using governor ladder
  265. [    2.711129] cpuidle: using governor menu
  266. [    2.717394] [mmc-msg] sw_mci_init
  267. [    2.726485] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  268. [    2.738457] [mmc-msg] sdc0 set round clock 400000, src 24000000
  269. [    2.752644] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  270. [    2.769883] [mmc-msg] sdc0 Probe: base:0xf0154000 irq:64 sg_cpu:f0156000(4fc00000) ret 0.
  271. [    2.783064] [mmc-msg] sdc3 set round clock 400000, src 24000000
  272. [    2.797203] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  273. [    2.814441] [mmc-msg] sdc3 Probe: base:0xf0158000 irq:67 sg_cpu:f015a000(4fc01000) ret 0.
  274. [    2.827201] [mmc_pm]: failed to fetch sdio card configuration!
  275. [    2.829644] sunxi_leds driver init
  276. [    2.837093] Registered led device: green:ph24:led1
  277. [    2.840831] Registered led device: blue:pg02:led2
  278. [    2.845907] ledtrig-cpu: registered to indicate activity on CPUs
  279. [    2.858449] usbcore: registered new interface driver usbhid
  280. [    2.866852] usbhid: USB HID core driver
  281. [    2.873390] ashmem: initialized
  282. [    2.880214] logger: created 256K log 'log_main'
  283. [    2.888585] logger: created 256K log 'log_events'
  284. [    2.897031] logger: created 256K log 'log_radio'
  285. [    2.905448] logger: created 256K log 'log_system'
  286. [    2.916017] IPv4 over IPv4 tunneling driver
  287. [    2.925853] usb 4-1: New USB device found, idVendor=046d, idProduct=c534
  288. [    2.938621] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  289. [    2.948790] usb 4-1: Product: USB Receiver
  290. [    2.956006] usb 4-1: Manufacturer: Logitech
  291. [    2.963008] TCP: bic registered
  292. [    2.974313] input: Logitech USB Receiver as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input2
  293. [    2.994206] generic-usb 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-sw-ohci-1/input0
  294. [    3.014098] input: Logitech USB Receiver as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.1/input/input3
  295. [    3.034415] generic-usb 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-sw-ohci-1/input1
  296. [    3.048940] TCP: cubic registered
  297. [    3.054814] TCP: westwood registered
  298. [    3.061005] TCP: highspeed registered
  299. [    3.066947] TCP: hybla registered
  300. [    3.072461] TCP: htcp registered
  301. [    3.077956] TCP: vegas registered
  302. [    3.083461] TCP: veno registered
  303. [    3.089215] TCP: scalable registered
  304. [    3.094808] TCP: lp registered
  305. [    3.100042] TCP: yeah registered
  306. [    3.105807] TCP: illinois registered
  307. [    3.112613] Initializing XFRM netlink socket
  308. [    3.120899] NET: Registered protocol family 10
  309. [    3.129845] NET: Registered protocol family 17
  310. [    3.137778] NET: Registered protocol family 15
  311. [    3.146892] [mmc_pm]: No sdio card, please check your config !!
  312. [    3.150563] Registering the dns_resolver key type
  313. [    3.157332] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  314. [    3.173575] Registering SWP/SWPB emulation handler
  315. [    3.182975] axp20_buck2: Failed to create debugfs directory
  316. [    3.194717] [cpu_freq] INF:-------------------V-F Table-------------------
  317. [    3.206668] [cpu_freq] INF:        voltage = 1450mv         frequency = 1008MHz
  318. [    3.217815] [cpu_freq] INF:        voltage = 1425mv         frequency =  912MHz
  319. [    3.228959] [cpu_freq] INF:        voltage = 1350mv         frequency =  864MHz
  320. [    3.240103] [cpu_freq] INF:        voltage = 1250mv         frequency =  720MHz
  321. [    3.251247] [cpu_freq] INF:        voltage = 1150mv         frequency =  528MHz
  322. [    3.262390] [cpu_freq] INF:        voltage = 1100mv         frequency =  312MHz
  323. [    3.273533] [cpu_freq] INF:        voltage = 1050mv         frequency =  144MHz
  324. [    3.284677] [cpu_freq] INF:        voltage = 1000mv         frequency =    0MHz
  325. [    3.296599] [cpu_freq] INF:-----------------------------------------------
  326. [    3.313299] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
  327. [    3.327952] registered taskstats version 1
  328. [    3.336531] I2C: i2c-4: HDMI I2C adapter
  329. [    3.370331] ParseEDID
  330. [    3.387288] EDID version: 1.3
  331. [    3.396533] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
  332. [    3.407687] Using above mode as preferred EDID mode
  333. [    3.428029] Unimplemented SVD code 17
  334. [    3.434239] Unimplemented SVD code 4
  335. [    3.440427] Unimplemented SVD code 14
  336. [    3.446712] Unimplemented SVD code 15
  337. [    3.452998] Unimplemented SVD code 29
  338. [    3.459272] Unimplemented SVD code 30
  339. [    3.465557] Unimplemented SVD code 31
  340. [    3.471842] Unimplemented SVD code 16
  341. [    3.478117] Unimplemented SVD code 23
  342. [    3.487631] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  343. [    3.500426] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  344. [    3.513219] disp_clk: Could not find a matching pll-freq for 72650000 pclk
  345. [    3.525925] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  346. [    3.538634] disp_clk: Could not find a matching pll-freq for 83650000 pclk
  347. [    3.551340] disp_clk: Could not find a matching pll-freq for 74600000 pclk
  348. [    3.564133] disp_clk: Could not find a matching pll-freq for 146850000 pclk
  349. [    3.577015] disp_clk: Could not find a matching pll-freq for 172900000 pclk
  350. [    3.589816] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  351. [    3.602525] disp_clk: Could not find a matching pll-freq for 53450000 pclk
  352. [    3.615235] disp_clk: Could not find a matching pll-freq for 27100000 pclk
  353. [    3.627942] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  354. [    3.638404] Parse_VideoData_Block: VIC 1 support
  355. [    3.646597] Parse_VideoData_Block: VIC 2 support
  356. [    3.654791] Parse_VideoData_Block: VIC 3 support
  357. [    3.663070] Parse_VideoData_Block: VIC 17 support
  358. [    3.671426] Parse_VideoData_Block: VIC 18 support
  359. [    3.679793] Parse_VideoData_Block: VIC 19 support
  360. [    3.688073] Parse_VideoData_Block: VIC 4 support
  361. [    3.696353] Parse_VideoData_Block: VIC 20 support
  362. [    3.704634] Parse_VideoData_Block: VIC 5 support
  363. [    3.712913] Parse_VideoData_Block: VIC 14 support
  364. [    3.721268] Parse_VideoData_Block: VIC 15 support
  365. [    3.729634] Parse_VideoData_Block: VIC 29 support
  366. [    3.738001] Parse_VideoData_Block: VIC 30 support
  367. [    3.751618] [mmc-msg] mmc 0 detect change, present 1
  368. [    3.760256] Parse_VideoData_Block: VIC 31 support
  369. [    3.768625] Parse_VideoData_Block: VIC 16 support
  370. [    3.776905] Parse_AudioData_Block: max channel=2
  371. [    3.785535] Parse_AudioData_Block: SampleRate code=17
  372. [    3.794250] Parse_AudioData_Block: WordLen code=7
  373. [    3.802433] Find HDMI Vendor Specific DataBlock
  374. [    3.812451] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  375. [    3.824813] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  376. [    3.837526] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  377. [    3.849889] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  378. [    3.861888] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  379. [    3.875018] disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
  380. [    4.257032] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  381. [    4.268462] [mmc-msg] sdc0 power on
  382. [    4.297444] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  383. [    4.311749] [mmc-msg] sdc0 set round clock 400000, src 24000000
  384. [    4.394743] [mmc-err] smc 0 err, cmd 52,  RTO
  385. [    4.403245] [mmc-err] smc 0 err, cmd 52,  RTO
  386. [    4.415955] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  387. [    4.436078] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  388. [    4.450854] [mmc-err] smc 0 err, cmd 5,  RTO
  389. [    4.459186] [mmc-err] smc 0 err, cmd 5,  RTO
  390. [    4.467513] [mmc-err] smc 0 err, cmd 5,  RTO
  391. [    4.475843] [mmc-err] smc 0 err, cmd 5,  RTO
  392. [    4.489107] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  393. [    4.506858] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  394. [    4.526982] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  395. [    4.614869] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  396. [    4.632624] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  397. [    4.647265] [mmc-msg] sdc0 set round clock 42857143, src 600000000
  398. [    4.721943] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  399. [    4.735903] mmc0: new high speed SDHC card at address aaaa
  400. [    4.745276] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
  401. [    4.753133]  mmcblk0: p1 p2
  402. [    4.988341] Console: switching to colour frame buffer device 240x67
  403. [    5.033419] axp20_buck3: incomplete constraints, leaving on
  404. [    5.043936] axp20_buck2: incomplete constraints, leaving on
  405. [    5.054368] axp20_ldo4: incomplete constraints, leaving on
  406. [    5.064666] axp20_ldo3: incomplete constraints, leaving on
  407. [    5.074973] axp20_ldo2: incomplete constraints, leaving on
  408. [    5.085274] axp20_ldo1: incomplete constraints, leaving on
  409. [    5.093824] console [netcon0] enabled
  410. [    5.101065] netconsole: network logging started
  411. [    5.109910] otg_wakelock_init: No USB transceiver found
  412. [    5.122780] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  413. [    5.133547] ALSA device list:
  414. [    5.139640]   #0: sunxi-CODEC  Audio Codec
  415. [    5.145947]   #1: sunxi-sndhdmi
  416. [    5.155205] md: Waiting for all devices to be available before autodetect
  417. [    5.166805] md: If you don't use raid, use raid=noautodetect
  418. [    5.176434] md: Autodetecting RAID arrays.
  419. [    5.184070] md: Scanned 0 and added 0 devices.
  420. [    5.190366] md: autorun ...
  421. [    5.195507] md: ... autorun DONE.
  422. [    5.990344] ParseEDID
  423. [    6.013528] EDID version: 1.3
  424. [    6.022846] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
  425. [    6.034198] Using above mode as preferred EDID mode
  426. [    6.060578] EXT4-fs (mmcblk0p2): recovery complete
  427. [    6.068193] Unimplemented SVD code 17
  428. [    6.070748] Unimplemented SVD code 4
  429. [    6.073409] Unimplemented SVD code 14
  430. [    6.080450] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  431. [    6.083066] Unimplemented SVD code 15
  432. [    6.088023] VFS: Mounted root (ext4 filesystem) on device 179:2.
  433. [    6.090639] Unimplemented SVD code 29
  434. [    6.093292] Unimplemented SVD code 30
  435. [    6.095214] devtmpfs: mounted
  436. [    6.097838] Unimplemented SVD code 31
  437. [    6.100455] Freeing init memory: 236K
  438. [    6.103070] Unimplemented SVD code 16
  439. [    6.105729] Unimplemented SVD code 23
  440. [    6.111574] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  441. [    6.117528] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  442. [    6.123390] disp_clk: Could not find a matching pll-freq for 72650000 pclk
  443. [    6.129269] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  444. [    6.135136] disp_clk: Could not find a matching pll-freq for 83650000 pclk
  445. [    6.140966] disp_clk: Could not find a matching pll-freq for 74600000 pclk
  446. [    6.146927] disp_clk: Could not find a matching pll-freq for 146850000 pclk
  447. [    6.152863] disp_clk: Could not find a matching pll-freq for 172900000 pclk
  448. [    6.163495] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  449. [    6.169357] disp_clk: Could not find a matching pll-freq for 53450000 pclk
  450. [    6.175222] disp_clk: Could not find a matching pll-freq for 27100000 pclk
  451. [    6.181046] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  452. [    6.468397] Parse_VideoData_Block: VIC 1 support
  453. [    6.482516] Parse_VideoData_Block: VIC 2 support
  454. [    6.496502] Parse_VideoData_Block: VIC 3 support
  455. [    6.510444] Parse_VideoData_Block: VIC 17 support
  456. [    6.524361] Parse_VideoData_Block: VIC 18 support
  457. [    6.538100] Parse_VideoData_Block: VIC 19 support
  458. [    6.551679] Parse_VideoData_Block: VIC 4 support
  459. [    6.565115] Parse_VideoData_Block: VIC 20 support
  460. [    6.568701] Parse_VideoData_Block: VIC 5 support
  461. [    6.577041] Parse_VideoData_Block: VIC 14 support
  462. [    6.580738] Parse_VideoData_Block: VIC 15 support
  463. [    6.588998] Parse_VideoData_Block: VIC 29 support
  464. [    6.592659] Parse_VideoData_Block: VIC 30 support
  465. [    6.601006] Parse_VideoData_Block: VIC 31 support
  466. [    6.604675] Parse_VideoData_Block: VIC 16 support
  467. [    6.608244] Parse_AudioData_Block: max channel=2
  468. [    6.616962] Parse_AudioData_Block: SampleRate code=17
  469. [    6.620637] Parse_AudioData_Block: WordLen code=7
  470. [    6.628810] Find HDMI Vendor Specific DataBlock
  471. [    6.638974] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  472. [    6.649505] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  473. [    6.660029] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  474. [    6.665564] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  475. [    7.065666] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
  476. [    7.098111] systemd[1]: Detected architecture 'arm'.
  477. [    7.132107] systemd[1]: Set hostname to <lemaker>.
  478. [    7.462592] systemd[1]: Unit type .busname is not supported on this system.
  479. [    7.797327] systemd[1]: Cannot add dependency job for unit org.freedesktop.resolve1.busname, ignoring: Unit org.freedesktop.resolve1.busname failed to load: No such file or directory.
  480. [    7.833730] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  481. [    7.869488] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  482. [    7.890053] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  483. [    7.914511] systemd[1]: Created slice Root Slice.
  484. [    7.928170] systemd[1]: Starting Root Slice.
  485. [    7.949284] systemd[1]: Listening on Delayed Shutdown Socket.
  486. [    7.965195] systemd[1]: Starting Delayed Shutdown Socket.
  487. [    7.986717] systemd[1]: Reached target Encrypted Volumes.
  488. [    8.001661] systemd[1]: Starting Encrypted Volumes.
  489. [    8.024374] systemd[1]: Created slice User and Session Slice.
  490. [    8.040284] systemd[1]: Starting User and Session Slice.
  491. [    8.062119] systemd[1]: Reached target Remote File Systems.
  492. [    8.077496] systemd[1]: Starting Remote File Systems.
  493. [    8.099374] systemd[1]: Listening on Journal Audit Socket.
  494. [    8.114934] systemd[1]: Starting Journal Audit Socket.
  495. [    8.138787] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  496. [    8.157548] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  497. [    8.180258] systemd[1]: Reached target Swap.
  498. [    8.193532] systemd[1]: Starting Swap.
  499. [    8.215003] systemd[1]: Listening on udev Control Socket.
  500. [    8.230924] systemd[1]: Starting udev Control Socket.
  501. [    8.254856] systemd[1]: Listening on LVM2 metadata daemon socket.
  502. [    8.272398] systemd[1]: Starting LVM2 metadata daemon socket.
  503. [    8.296697] systemd[1]: Listening on udev Kernel Socket.
  504. [    8.312895] systemd[1]: Starting udev Kernel Socket.
  505. [    8.341462] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  506. [    8.365882] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  507. [    8.395226] systemd[1]: Listening on Journal Socket (/dev/log).
  508. [    8.413312] systemd[1]: Starting Journal Socket (/dev/log).
  509. [    8.433415] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  510. [    8.455460] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  511. [    8.482663] systemd[1]: Reached target Paths.
  512. [    8.497824] systemd[1]: Starting Paths.
  513. [    8.523993] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  514. [    8.544010] systemd[1]: Starting Device-mapper event daemon FIFOs.
  515. [    8.572330] systemd[1]: Created slice System Slice.
  516. [    8.589271] systemd[1]: Starting System Slice.
  517. [    8.617645] systemd[1]: Created slice system-serial\x2dgetty.slice.
  518. [    8.637326] systemd[1]: Starting system-serial\x2dgetty.slice.
  519. [    8.664150] systemd[1]: Reached target Slices.
  520. [    8.680099] systemd[1]: Starting Slices.
  521. [    8.706271] systemd[1]: Created slice system-getty.slice.
  522. [    8.723726] systemd[1]: Starting system-getty.slice.
  523. [    8.749667] systemd[1]: Listening on Journal Socket.
  524. [    8.766516] systemd[1]: Starting Journal Socket.
  525. [    8.784039] systemd[1]: Mounted Huge Pages File System.
  526. [    8.984265] systemd[1]: Starting Load Kernel Modules...
  527. [    9.068571] systemd[1]: Starting udev Coldplug all Devices...
  528. [    9.114258] systemd[1]: Mounting Temporary Directory...
  529. [    9.153799] systemd[1]: Mounting Debug File System...
  530. [    9.185743] systemd[1]: Starting Journal Service...
  531. [    9.235894] UMP<2>: Inserting UMP device driver. Compiled: Mar  9 2015, time: 09:20:02
  532. [    9.243229] UMP<2>: Using OS memory backend, allocation limit: 134217728
  533. [    9.256291] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  534. [    9.273865] UMP: UMP device driver  loaded
  535. [    9.305037] systemd[1]: Started Set Up Additional Binary Formats.
  536. [    9.334166] systemd[1]: Created slice system-netctl.slice.
  537. [    9.351745] systemd[1]: Starting system-netctl.slice.
  538. [    9.365154] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432)
  539. [    9.375410] mali: use config clk_div 1
  540. [    9.388708] mali: clk_div 1
  541. [    9.399650] Mali: mali clock set completed, clock is  312000000 Hz
  542. [    9.409753] systemd[1]: Starting Remount Root and Kernel File Systems...
  543. [    9.425037] systemd-journald[74]: Failed to set file attributes: Inappropriate ioctl for device
  544. [    9.447104] mali: use config clk_div 1
  545. [    9.448856] mali: clk_div 1
  546. [    9.449399] Mali: mali clock set completed, clock is  312000000 Hz
  547. [    9.456113] Mali: Mali device driver loaded
  548. [    9.488074] [drm] Initialized drm 1.1.0 20060810
  549. [    9.505010] Mali DRM initialize, driver name: mali_drm, version 2.1
  550. [    9.510642] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  551. [    9.516007] Mali DRM initialize, driver name: mali_drm, version 2.1
  552. [    9.521499] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  553. [    9.539629] [cedar dev]: install start!!!
  554. [    9.543216] [cedar dev]: install end!!!
  555. [    9.608961] systemd[1]: Mounted POSIX Message Queue File System.
  556. [    9.658292] systemd[1]: Starting Setup Virtual Console...
  557. [    9.708270] systemd[1]: Mounted Debug File System.
  558. [    9.739519] systemd[1]: Mounted Temporary Directory.
  559. [    9.774038] systemd[1]: Started Load Kernel Modules.
  560. [    9.889380] systemd[1]: Started Create list of required static device nodes for the current kernel.
  561. [    9.936430] systemd[1]: Started Remount Root and Kernel File Systems.
  562. [    9.972529] systemd[1]: Started udev Coldplug all Devices.
  563. [   10.141055] systemd-journald[74]: File /var/log/journal/b351e8f93716408daedf135695d2427c/system.journal corrupted or uncleanly shut down, renaming and replacing.
  564. [   10.171658] systemd[1]: Started Rebuild Hardware Database.
  565. [   10.193294] systemd[1]: Started Rebuild Dynamic Linker Cache.
  566. [   10.225879] systemd[1]: Starting Load/Save Random Seed...
  567. [   10.263500] systemd[1]: Started First Boot Wizard.
  568. [   10.284219] systemd[1]: Started Create System Users.
  569. [   10.321626] systemd[1]: Starting Create Static Device Nodes in /dev...
  570. [   10.374460] systemd[1]: Mounting FUSE Control File System...
  571. [   10.438227] systemd[1]: Starting Apply Kernel Variables...
  572. [   10.524450] systemd[1]: Mounting Configuration File System...
  573. [   10.586467] systemd[1]: Mounted FUSE Control File System.
  574. [   10.624651] systemd[1]: Mounted Configuration File System.
  575. [   10.660034] systemd[1]: Started Journal Service.
  576. [   10.980023] systemd-journald[74]: Received request to flush runtime journal from PID 1
  577. [   13.815074] GMAC gpio_power_hd:gpio_direction_output
  578. [   14.132213] eth0: device MAC address 02:05:05:41:95:70
  579. [   14.167878] sunxi_gmac: probed
  580. [   14.185496] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
  581. [   14.205989] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
  582. [   20.713779] systemd-journald[74]: File /var/log/journal/b351e8f93716408daedf135695d2427c/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
  583. [   22.692657] Warning: this sunxi disp driver will see significant redesign.
  584. [   22.704271] Applications using /dev/disp directly will break.
  585. [   22.716375] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
  586. [   22.726829] [DISP] layer allocated: 0,101
  587. [   22.851431] UMP<2>: New session opened
  588. [   46.615282] [ap6210] --->The Drive has been modified for BananaPro by LeMaker team<---
  589. [   46.625976] [ap6210] select wifi ap6210
  590. [   46.632765] [ap6210] Initializing ap6210.
  591. [   46.637946] [ap6210] Succeed to set the gpio ap6210_wl_vdd_en to 0
  592. [   46.653140] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
  593. [   46.761379] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  594. [   46.772795] [mmc-msg] sdc3 power on
  595. [   46.797448] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  596. [   46.811741] [mmc-msg] sdc3 set round clock 400000, src 24000000
  597. [   46.851748] [ap6210] WLAN placed in POWER ON
  598. [   46.894734] [mmc-err] smc 3 err, cmd 52,  RTO
  599. [   46.903217] [mmc-err] smc 3 err, cmd 52,  RTO
  600. [   46.915918] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  601. [   46.935926] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  602. [   46.950334] [mmc-err] smc 3 err, cmd 8,  RTO
  603. [   46.963313] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  604. [   46.986256] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  605. [   46.997690] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  606. [   47.013896] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  607. [   47.026545] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  608. [   47.053626] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  609. [   47.071412] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  610. [   47.086047] [mmc-msg] sdc3 set round clock 42857143, src 600000000
  611. [   47.155734] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  612. [   47.171435] mmc1: new high speed SDIO card at address 0001
  613. [   47.183112] [ap6210] Linux Kernel SDIO/MMC Driver
  614. [   47.203966] [ap6210] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  615. [   47.210230] [ap6210] dhd_open : dhd_open: call dev open before insmod complete!
  616. [   47.232565] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
  617. [   47.237620] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
  618. [   47.257268] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar  9 2015 at 09:24:23.
  619. [   47.268883] [mmc-err] smc 3 err, cmd 52,  RTO
  620. [   47.279708] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110
  621. [   47.291960] [mmc-err] smc 3 err, cmd 52,  RTO
  622. [   47.302814] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110
  623. [   47.314928] [mmc-err] smc 3 err, cmd 52,  RTO
  624. [   47.325772] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000e=08, Err: -110
  625. [   47.338466] [ap6210] dhdsdio_htclk: HT Avail request error: -35
  626. [   47.350188] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
  627. [   47.362839] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
  628. [   47.372947] [mmc-err] smc 3 err, cmd 52,  RTO
  629. [   47.383762] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  630. [   47.395853] [mmc-err] smc 3 err, cmd 52,  RTO
  631. [   47.410776] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  632. [   47.422743] [mmc-err] smc 3 err, cmd 52,  RTO
  633. [   47.433569] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  634. [   47.445972] [mmc-err] smc 3 err, cmd 52,  RTO
  635. [   47.457125] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  636. [   47.469429] [mmc-err] smc 3 err, cmd 52,  RTO
  637. [   47.480279] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  638. [   47.493185] [mmc-err] smc 3 err, cmd 52,  RTO
  639. [   47.504026] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  640. [   47.522647] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
  641. [   47.532654] [ap6210] WLAN placed in RESET
  642. [   47.540115] [mmc-err] smc 3 err, cmd 52,  RTO
  643. [   47.546114] bcm4330: exports duplicate symbol bcmsdh_probe (owned by ap6210)
  644. [   47.563992] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  645. [   47.575837] [mmc-err] smc 3 err, cmd 52,  RTO
  646. [   47.587172] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  647. [   47.599358] [mmc-err] smc 3 err, cmd 52,  RTO
  648. [   47.610239] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  649. [   47.621159] [mmc-err] smc 3 err, cmd 52,  RTO
  650. [   47.632014] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  651. [   47.645413] [mmc-err] smc 3 err, cmd 52,  RTO
  652. [   47.656300] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  653. [   47.668177] [mmc-err] smc 3 err, cmd 52,  RTO
  654. [   47.679045] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  655. [   47.691727] [mmc-err] smc 3 err, cmd 52,  RTO
  656. [   47.702604] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  657. [   47.714471] [mmc-err] smc 3 err, cmd 52,  RTO
  658. [   47.725292] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  659. [   47.737212] [mmc-err] smc 3 err, cmd 52,  RTO
  660. [   47.748023] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  661. [   47.758843] [mmc-err] smc 3 err, cmd 52,  RTO
  662. [   47.769643] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  663. [   47.783595] [mmc-err] smc 3 err, cmd 52,  RTO
  664. [   47.794450] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  665. [   47.806259] [mmc-err] smc 3 err, cmd 52,  RTO
  666. [   47.817140] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  667. [   47.828224] [mmc-err] smc 3 err, cmd 52,  RTO
  668. [   47.839070] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  669. [   47.851035] [mmc-err] smc 3 err, cmd 52,  RTO
  670. [   47.861918] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  671. [   47.873768] [mmc-err] smc 3 err, cmd 52,  RTO
  672. [   47.884581] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  673. [   47.895524] [mmc-err] smc 3 err, cmd 52,  RTO
  674. [   47.906401] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  675. [   47.918232] [mmc-err] smc 3 err, cmd 52,  RTO
  676. [   47.929055] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  677. [   47.940906] [mmc-err] smc 3 err, cmd 52,  RTO
  678. [   47.951921] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  679. [   47.964765] [mmc-err] smc 3 err, cmd 52,  RTO
  680. [   47.976259] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
  681. [   47.990552] [mmc-err] smc 3 err, cmd 52,  RTO
  682. [   48.001403] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
  683. [   48.013205] [mmc-err] smc 3 err, cmd 52,  RTO
  684. [   48.023999] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
  685. [   48.036013] [ap6210] dhdsdio_membytes: window change failed
  686. [   48.044923] [mmc-err] smc 3 err, cmd 52,  RTO
  687. [   48.055763] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  688. [   48.067528] [mmc-err] smc 3 err, cmd 52,  RTO
  689. [   48.078346] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  690. [   48.090160] [mmc-err] smc 3 err, cmd 52,  RTO
  691. [   48.100995] [ap6210] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
  692. [   48.114054] [ap6210] dhdsdio_membytes: FAILED to set window back to 0x0
  693. [   48.127027] [ap6210] _dhdsdio_download_firmware: error placing ARM core in reset
  694. [   48.147884] [ap6210] dhd_bus_start: dhdsdio_probe_download failed. firmware = /lib/firmware/ap6210/fw_bcm40181a2.bin nvram = /lib/firmware/ap6210/nvram_ap6210.txt
  695. [   48.166145] [ap6210] dhd_open: failed with code -1
  696. [   48.177566] [ap6210] dhd_check_hang: Event HANG send up due to  re=0 te=0 e=-36 s=0
  697. [   48.188374] [ap6210] Error getting the SSID
  698. [   48.195941] [ap6210] In : chip crash eventing
  699. [   48.222827] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
  700. [   48.232372] ------------[ cut here ]------------
  701. [   48.239415] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar  9 2015 at 09:24:23.
  702. [   48.249058] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
  703. [   48.269613] WARNING: at net/wireless/sme.c:744 cfg80211_disconnected+0xc0/0xc4()
  704. [   48.278853] Modules linked in: ap6210 sunxi_cedar_mod mali_drm drm mali disp_ump ump
  705. [   48.292640] [<c001542c>] (unwind_backtrace+0x0/0x12c) from [<c00372dc>] (warn_slowpath_common+0x54/0x64)
  706. [   48.301526] [<c00372dc>] (warn_slowpath_common+0x54/0x64) from [<c0037388>] (warn_slowpath_null+0x1c/0x24)
  707. [   48.310012] [<c0037388>] (warn_slowpath_null+0x1c/0x24) from [<c06a8474>] (cfg80211_disconnected+0xc0/0xc4)
  708. [   48.319300] [<c06a8474>] (cfg80211_disconnected+0xc0/0xc4) from [<bf0dde08>] (wl_cfg80211_hang+0x44/0x7c [ap6210])
  709. [   48.328358] [<bf0dde08>] (wl_cfg80211_hang+0x44/0x7c [ap6210]) from [<c004de2c>] (process_one_work+0x134/0x3b0)
  710. [   48.336368] [<c004de2c>] (process_one_work+0x134/0x3b0) from [<c004e3e8>] (worker_thread+0x144/0x3a8)
  711. [   48.343502] [<c004e3e8>] (worker_thread+0x144/0x3a8) from [<c00524f4>] (kthread+0x90/0x94)
  712. [   48.350801] [<c00524f4>] (kthread+0x90/0x94) from [<c000f7ec>] (kernel_thread_exit+0x0/0x8)
  713. [   48.362754] ---[ end trace 26ff2b210a1d929f ]---
  714. [   48.457504] [ap6210] WLAN going back to live
  715. [   48.463591] sdio_reset_comm():
  716. [   48.472055] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  717. [   48.492155] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  718. [   48.510905] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  719. [   48.525168] [mmc-msg] sdc3 set round clock 400000, src 24000000
  720. [   48.594802] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  721. [   48.618156] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  722. [   48.629919] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  723. [   48.641692] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  724. [   48.655750] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  725. [   48.682840] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  726. [   48.700572] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  727. [   48.717864] [mmc-msg] sdc3 set round clock 42857143, src 600000000
  728. [   48.787900] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  729. [   48.801128] [ap6210] dhd_bus_devreset: WLAN ON
  730. [   48.816376] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
  731. [   48.829073] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
  732. [   48.842339] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
  733. [   49.130723] [ap6210] Dongle ready, protocol version 4
  734. [   49.140473] [ap6210] Dongle ready, protocol version 4
  735. [   49.155598] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e9:b8:b2
  736. [   49.181968] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
  737. [   49.194431] [ap6210] Chip: a962 Rev 1 Pkg 9
  738. [   49.303760] cfg80211: Calling CRDA to update world regulatory domain
  739. [   51.663386] warning: process `ntpd' used the deprecated sysctl system call with 1.40.6.
  740. [  116.128787] [ap6210] Reason 3
  741. [  116.138010] [ap6210] Link down Reason : WLC_E_LINK
  742. [  116.150369] cfg80211: Calling CRDA to update world regulatory domain
  743. [  116.237887] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
  744. [  116.249298] [ap6210] bcmsdh_set_irq Flag = 0
  745. [  116.257594] [ap6210] dhd_bus_devreset: WLAN OFF DONE
  746. [  116.269984] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
  747. [  116.495686] [ap6210] WLAN placed in RESET
  748. [  116.546586] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
  749. [  116.559617] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar  9 2015 at 09:24:23.
  750. [  116.573450] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
  751. [  116.778242] [ap6210] WLAN going back to live
  752. [  116.784301] sdio_reset_comm():
  753. [  116.792744] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  754. [  116.812616] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  755. [  116.831339] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  756. [  116.845578] [mmc-msg] sdc3 set round clock 400000, src 24000000
  757. [  116.915189] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  758. [  116.942947] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  759. [  116.954567] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  760. [  116.966090] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  761. [  116.978841] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  762. [  117.006091] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  763. [  117.023875] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  764. [  117.038556] [mmc-msg] sdc3 set round clock 42857143, src 600000000
  765. [  117.108298] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  766. [  117.121570] [ap6210] dhd_bus_devreset: WLAN ON
  767. [  117.135459] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
  768. [  117.147943] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
  769. [  117.161225] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
  770. [  117.440307] [ap6210] bcmsdh_set_irq Flag = 1
  771. [  117.448546] [ap6210] dhd_bus_devreset: WLAN ON DONE
  772. [  117.457752] [ap6210] Dongle ready, protocol version 4
  773. [  117.467508] [ap6210] Dongle ready, protocol version 4
  774. [  117.482270] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e9:b8:b2
  775. [  117.508796] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
  776. [  117.521799] [ap6210] Chip: a962 Rev 1 Pkg 9
  777. [  117.648336] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
  778. [  117.658325] [ap6210] bcmsdh_set_irq Flag = 0
  779. [  117.666682] [ap6210] dhd_bus_devreset: WLAN OFF DONE
  780. [  117.676873] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
  781. [  117.881320] [ap6210] WLAN placed in RESET
  782. [  118.309538] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
  783. [  118.322560] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar  9 2015 at 09:24:23.
  784. [  118.335737] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
  785. [  118.537355] [ap6210] WLAN going back to live
  786. [  118.543424] sdio_reset_comm():
  787. [  118.551867] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  788. [  118.571768] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  789. [  118.591529] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  790. [  118.605791] [mmc-msg] sdc3 set round clock 400000, src 24000000
  791. [  118.675411] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  792. [  118.700538] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  793. [  118.712236] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  794. [  118.723762] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  795. [  118.741272] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  796. [  118.768524] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  797. [  118.786317] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  798. [  118.801278] [mmc-msg] sdc3 set round clock 42857143, src 600000000
  799. [  118.871073] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  800. [  118.885485] [ap6210] dhd_bus_devreset: WLAN ON
  801. [  118.899374] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
  802. [  118.911868] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
  803. [  118.925089] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
  804. [  119.202069] [ap6210] bcmsdh_set_irq Flag = 1
  805. [  119.210349] [ap6210] dhd_bus_devreset: WLAN ON DONE
  806. [  119.219597] [ap6210] Dongle ready, protocol version 4
  807. [  119.229394] [ap6210] Dongle ready, protocol version 4
  808. [  119.243918] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e9:b8:b2
  809. [  119.271213] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
  810. [  119.283724] [ap6210] Chip: a962 Rev 1 Pkg 9
  811. [  141.542568] [ap6210] bcmsdh_sdmmc: F0 Wr:0x04: write disallowed
  812. [  141.552413] [ap6210] bcmsdh_set_irq Flag = 0
  813. [  141.560759] [ap6210] dhd_bus_devreset: WLAN OFF DONE
  814. [  141.570934] [ap6210] Succeed to set the gpio ap6210_wl_regon to 0
  815. [  141.770894] [ap6210] WLAN placed in RESET
  816. [  143.734733] [ap6210] Dongle Host Driver, version 1.28.23.3 (r).
  817. [  143.747771] [ap6210] Compiled in drivers/net/wireless/ap6210 on Mar  9 2015 at 09:24:23.
  818. [  143.760942] [ap6210] Succeed to set the gpio ap6210_wl_regon to 1
  819. [  143.967482] [ap6210] WLAN going back to live
  820. [  143.973543] sdio_reset_comm():
  821. [  143.981985] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  822. [  144.001854] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  823. [  144.020576] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  824. [  144.034815] [mmc-msg] sdc3 set round clock 400000, src 24000000
  825. [  144.104485] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  826. [  144.128368] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  827. [  144.139903] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  828. [  144.151423] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  829. [  144.164150] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  830. [  144.191400] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  831. [  144.209198] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  832. [  144.223863] [mmc-msg] sdc3 set round clock 42857143, src 600000000
  833. [  144.298384] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  834. [  144.311652] [ap6210] dhd_bus_devreset: WLAN ON
  835. [  144.325496] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
  836. [  144.337977] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
  837. [  144.351233] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin
  838. [  144.630302] [ap6210] bcmsdh_set_irq Flag = 1
  839. [  144.638515] [ap6210] dhd_bus_devreset: WLAN ON DONE
  840. [  144.647804] [ap6210] Dongle ready, protocol version 4
  841. [  144.657765] [ap6210] Dongle ready, protocol version 4
  842. [  144.672798] [ap6210] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e9:b8:b2
  843. [  144.699373] [ap6210] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
Copy the Code

I would appreciate any help...


I think you need read the article below:
https://wiki.archlinux.org/index ... tic_module_handling

ArchLinux do not use the /etc/modules to manage the kernel modules, it use static files under /etc/modules-load.d/ .

xxemre  
thank you, that worked..

now I have another problem, netctl does not automatically start the network profile wireless-wpa. I ran

  1. netctl reenable wireless-wpa
Copy the Code


but at boot time, the profile is not automatically started. Might that be something about root privilages?

You have to log in before you can reply Login | Sign Up

Points Rules