Bananian

OS asks for eth0 address minutes after plugged in

0 817
YaniMan  
Edited by YaniMan at Jan 28, 2016 12:41

Hi!
I configured eth0 on Bananian Linux as follows:
allow-hotplug eth0
iface eth0 inet dhcp

This works well if i start the system with ethernet cable plugged in, but if i plug it in later, then it waits 1-2 minutes before gets IP address. The DHCP server is fine, no other network nodes has this issue.
Can someone point me, what could be wrong?
Thanks.

You have to log in before you can reply Login | Sign Up

Points Rules