Problems with wlan and bluetooth under android

8 2538
Hello,

i bought the Lemaker Guitare an i will use it with android. I have the version 1601 in the emmc. My problem is that i can't use wlan and bluetooth.

Is it useable in the 1601 version and my guitar is defective or has the wlan and bluetooth no function in this version?

Please help me.

Thanks.


Tido  
Edited by Tido at Apr 02, 2016 09:46

Hi,

I don't know much about ANDROID on Guitar, can you login via SSH (ethernet) ?
And if so, can you do a:
  • lsmod
  • iw list
  • uname -a
and post the results in a 'code' bubble.

If you are uncertain about the hardware, flash Lemuntu on it and do some checks.



Hi,

thanks for your replay

I have installed Lemuntu. But there i can't use wkan and bluetooth too.

The wlan driver is showing with lsmod but in the wpa_gui tool it shows me no adapter and network.

Bluetooth is don't working too. The Bluetooth Manger shows me a failure at startup that he can't not connect to blue_z or so.

The normal network adapter is working.

lsmod shows

  1. pvrsrvkm
  2. drm
  3. owl_camera
  4. ctp_ft5x06
  5. atc260x_irkeypad
  6. wlan_8723bs
  7. ethernet
Copy the Code


iw list shows nothing

uname -a shows
  1. Linux Lemuntu 3.10.37 #2 SMP PREEMPT Sat Apr 16 02  11:06:24 CST 2016 armv71 GNU/Linux
Copy the Code


Tido  
Edited by Tido at Apr 02, 2016 19:25
wiederre replied at Apr 02, 2016 10:07
Hi,

thanks for your replay

I see.
Did you install Lemuntu on the eMMC storage, this is important ?

Yes. Lemuntu is installed on the eMMC Storage. Also Android. All last three versions. No Wlan and
Bluetooth  at all. I think it must be a hardware problem.

I have it done but no luck. At step 4 it shows me no devices. Tomorrow i will send it back and hope a new one is better.

With the new board the problems are solved. It seems a hardware fault.

Thanks for your help

wiederre replied at Apr 15, 2016 08:40
With the new board the problems are solved. It seems a hardware fault.

Thanks for your help

They shipping faulty boards ? how it cost u to resend the board

You have to log in before you can reply Login | Sign Up

Points Rules