Lemuntu

VPU Encoder not working

3 905
finger  
I downloaded and installed the latest Lemuntu and followed the instructions in:
  1. http://wiki.lemaker.org/LeMaker_Guitar:Video_encoder_framework
  2. and
  3. http://wiki.lemaker.org/LeMaker_Guitar:Video_decoder_engine
Copy the Code

and Gstreamer encoder "omxh264enc" cannot be found!

Here is the distro:
DISTRIB_ID=Lemuntu
DISTRIB_RELEASE=v1604
DISTRIB_CODENAME=PRECISE
DISTRIB_DESCRIPTION="Free Operating System Based On Debian Jessie"

is this really working?
hange  
Hi,
Before you run gst-inspect-1.0 omxh264enc for test, you should do this two step first(have to).
1.
  1. export GST_OMX_CONFIG_DIR=/usr/lib/arm-linux-gnueabihf/gstreamer-1.0/config/bellagio
Copy the Code
2.
  1. cp ./libgstomx.so  /usr/lib/arm-linux-gnueabihf/gstreamer-1.0/
Copy the Code

The  libgstomx.so file can be download form http://mirror.lemaker.org/gstreamer_decoder.tar.bz2

Dont forget to do the step 2 before test.

finger  
Hi hange,

Sure i did this steps. Does not work in Lemuntu and in my own rootfs.

Please, if you have it working share your image, so we can find out what is missing.

Thanks,

Finger

hnsncxy  
Edited by hnsncxy at May 19, 2016 23:57

Hi,
We have test the GStreamer on the Lemuntu v1604 again, and it can work well.  You can try to run the command below again.
# cp ./libgstomx.so  /usr/lib/arm-linux-gnueabihf/gstreamer-1.0/
# chmod 644 /usr/lib/arm-linux-gnueabihf/gstreamer-1.0/libgstomx.so






You have to log in before you can reply Login | Sign Up

Points Rules