Bananian

After switch to systemd root filesystem read only

2 1588
kragil  
I installed systemd and now my root filesystem will only mount read only on startup.
I checked the SD card with my desktop PC and there were no errors. / is not in fstab, how do I fix this?

dmesg output:


[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.24-bananian (root@bananian-build) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP Sat Oct 15 11:05:39 UTC 2016
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: LeMaker Banana Pi
[    0.000000] cma: Reserved 16 MiB at 0x7ec00000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 261738
[    0.000000] free_area_init_node: node 0, pgdat c0b1cc80, node_mem_map ef6f8000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 65130 pages, LIFO batch:15
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] PERCPU: Embedded 13 pages/cpu @ef6c3000 s23168 r8192 d21888 u53248
[    0.000000] pcpu-alloc: s23168 r8192 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260010
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1008576K/1046952K available (8142K kernel code, 632K rwdata, 2120K rodata, 488K init, 304K bss, 21992K reserved, 16384K cma-reserved, 244136K highmem)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0a0dbc4   (10263 kB)
      .init : 0xc0a0e000 - 0xc0a88000   ( 488 kB)
      .data : 0xc0a88000 - 0xc0b260a0   ( 633 kB)
       .bss : 0xc0b29000 - 0xc0b75278   ( 305 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000019] Switching to timer-based delay loop, resolution 41ns
[    0.000409] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000596] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
[    0.000789] Console: colour dummy device 80x30
[    0.001380] console [tty0] enabled
[    0.001418] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001459] pid_max: default: 32768 minimum: 301
[    0.001628] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001658] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002410] Initializing cgroup subsys io
[    0.002465] Initializing cgroup subsys memory
[    0.002515] Initializing cgroup subsys devices
[    0.002546] Initializing cgroup subsys freezer
[    0.002583] Initializing cgroup subsys net_cls
[    0.002609] Initializing cgroup subsys perf_event
[    0.002635] Initializing cgroup subsys net_prio
[    0.002711] CPU: Testing write buffer coherency: ok
[    0.003107] /cpus/cpu@0 missing clock-frequency property
[    0.003148] /cpus/cpu@1 missing clock-frequency property
[    0.003176] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003272] Setting up static identity map for 0x400082c0 - 0x40008318
[    0.005461] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005558] Brought up 2 CPUs
[    0.005615] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.005636] CPU: All CPU(s) started in HYP mode.
[    0.005654] CPU: Virtualization extensions available.
[    0.006574] devtmpfs: initialized
[    0.015927] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.016355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017363] xor: measuring software checksum speed
[    0.110004]    arm4regs  :  1243.600 MB/sec
[    0.210067]    8regs     :   794.400 MB/sec
[    0.310131]    32regs    :   771.200 MB/sec
[    0.410197]    neon      :  1161.600 MB/sec
[    0.410218] xor: using function: arm4regs (1243.600 MB/sec)
[    0.410384] pinctrl core: initialized pinctrl subsystem
[    0.411607] NET: Registered protocol family 16
[    0.412795] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.440281] cpuidle: using governor ladder
[    0.455772] cpuidle: using governor menu
[    0.462978] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.463031] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.640641] raid6: int32x1  gen()   126 MB/s
[    0.810753] raid6: int32x1  xor()    91 MB/s
[    0.981071] raid6: int32x2  gen()   168 MB/s
[    1.151211] raid6: int32x2  xor()   103 MB/s
[    1.321138] raid6: int32x4  gen()   167 MB/s
[    1.491285] raid6: int32x4  xor()   113 MB/s
[    1.661722] raid6: int32x8  gen()   166 MB/s
[    1.831630] raid6: int32x8  xor()   107 MB/s
[    2.001802] raid6: neonx1   gen()   426 MB/s
[    2.171922] raid6: neonx1   xor()   309 MB/s
[    2.342071] raid6: neonx2   gen()   584 MB/s
[    2.512148] raid6: neonx2   xor()   429 MB/s
[    2.682365] raid6: neonx4   gen()   714 MB/s
[    2.852538] raid6: neonx4   xor()   475 MB/s
[    3.022710] raid6: neonx8   gen()   609 MB/s
[    3.192835] raid6: neonx8   xor()   433 MB/s
[    3.192856] raid6: using algorithm neonx4 gen() 714 MB/s
[    3.192875] raid6: .... xor() 475 MB/s, rmw enabled
[    3.192894] raid6: using intx1 recovery algorithm
[    3.193277] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[    3.193360] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    3.193419] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    3.194262] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    3.195304] SCSI subsystem initialized
[    3.195668] libata version 3.00 loaded.
[    3.196008] usbcore: registered new interface driver usbfs
[    3.196114] usbcore: registered new interface driver hub
[    3.196206] usbcore: registered new device driver usb
[    3.196507] media: Linux media interface: v0.10
[    3.196586] Linux video capture interface: v2.00
[    3.196721] pps_core: LinuxPPS API ver. 1 registered
[    3.196746] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.196801] PTP clock support registered
[    3.198393] clocksource: Switched to clocksource arch_sys_counter
[    3.253120] simple-framebuffer 7fe79000.framebuffer: framebuffer at 0x7fe79000, 0x178e00 bytes, mapped to 0xf0900000
[    3.253184] simple-framebuffer 7fe79000.framebuffer: format=x8r8g8b8, mode=656x536x32, linelength=2880
[    3.260114] Console: switching to colour frame buffer device 82x33
[    3.266320] simple-framebuffer 7fe79000.framebuffer: fb0: simplefb registered!
[    3.276639] NET: Registered protocol family 2
[    3.277544] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    3.282024] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    3.286500] TCP: Hash tables configured (established 8192 bind 8192)
[    3.291073] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    3.295616] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    3.300493] NET: Registered protocol family 1
[    3.305571] RPC: Registered named UNIX socket transport module.
[    3.310213] RPC: Registered udp transport module.
[    3.314630] RPC: Registered tcp transport module.
[    3.318911] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.324095] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    3.333855] futex hash table entries: 512 (order: 3, 32768 bytes)
[    3.338748] Initialise system trusted keyring
[    3.351884] zbud: loaded
[    3.359621] NFS: Registering the id_resolver key type
[    3.363785] Key type id_resolver registered
[    3.367877] Key type id_legacy registered
[    3.372020] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.376228] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.382137] JFS: nTxBlock = 8007, nTxLock = 64060
[    3.396828] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    3.409744] bounce: pool size: 64 pages
[    3.414365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.423275] io scheduler noop registered
[    3.427562] io scheduler deadline registered (default)
[    3.431869] io scheduler cfq registered
[    3.436439] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
[    3.447613] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    3.520836] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    3.528348] console [ttyS0] disabled
[    3.552720] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A
[    4.443121] console [ttyS0] enabled
[    4.474284] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 45, base_baud = 1500000) is a U6_16550A
[    4.515055] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 46, base_baud = 1500000) is a U6_16550A
[    4.537569] brd: module loaded
[    4.552826] loop: module loaded
[    4.628464] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    4.644637] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[    4.656214] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    4.673884] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
[    4.692551] scsi host0: ahci-sunxi
[    4.700983] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 32
[    4.721041] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.732403] ehci-platform: EHCI generic platform driver
[    4.742689] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.753572] ohci-platform: OHCI generic platform driver
[    4.763786] usbcore: registered new interface driver usb-storage
[    4.775964] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[    4.787494] sunxi-rtc 1c20d00.rtc: RTC enabled
[    4.796660] i2c /dev entries driver
[    4.805888] axp20x 0-0034: AXP20x variant AXP209 found
[    4.828809] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[    4.853040] axp20x 0-0034: AXP20X driver loaded
[    4.881468] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    4.899255] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[    4.910041] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    4.958641] sunxi-mmc 1c0f000.mmc: base:0xf08f0000 irq:27
[    4.969555] ledtrig-cpu: registered to indicate activity on CPUs
[    4.980174] hidraw: raw HID events driver (C) Jiri Kosina
[    4.990162] usbcore: registered new interface driver usbhid
[    5.000060] usbhid: USB HID core driver
[    5.009491] Initializing XFRM netlink socket
[    5.019373] NET: Registered protocol family 10
[    5.029254] NET: Registered protocol family 17
[    5.037920] NET: Registered protocol family 15
[    5.046490] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    5.067287] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.067324] 8021q: 802.1Q VLAN Support v1.8
[    5.067401] Key type dns_resolver registered
[    5.067890] Registering SWP/SWPB emulation handler
[    5.068916] registered taskstats version 1
[    5.068935] Loading compiled-in X.509 certificates
[    5.069064] zswap: loaded using pool lzo/zbud
[    5.072291] Btrfs loaded
[    5.073909] Key type encrypted registered
[    5.093099] mmc0: host does not support reading read-only switch, assuming write-enable
[    5.095573] mmc0: new high speed SDHC card at address 59b4
[    5.096380] mmcblk0: mmc0:59b4 SDU1  14.7 GiB
[    5.097737]  mmcblk0: p1 p2
[    5.178502] sun7i-dwmac 1c50000.ethernet: no reset control found
[    5.178509]  Ring mode enabled
[    5.178515]  No HW DMA feature register supported
[    5.178516]  Normal descriptors
[    5.178518]  TX Checksum insertion supported
[    5.183251] libphy: stmmac: probed
[    5.183262] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    5.183267] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    5.183773] ehci-platform 1c14000.usb: EHCI Host Controller
[    5.183811] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    5.184082] ehci-platform 1c14000.usb: irq 29, io mem 0x01c14000
[    5.198421] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[    5.198707] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.198715] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.198721] usb usb1: Product: EHCI Host Controller
[    5.198727] usb usb1: Manufacturer: Linux 4.4.24-bananian ehci_hcd
[    5.198733] usb usb1: SerialNumber: 1c14000.usb
[    5.199650] hub 1-0:1.0: USB hub found
[    5.199727] hub 1-0:1.0: 1 port detected
[    5.200570] ehci-platform 1c1c000.usb: EHCI Host Controller
[    5.200604] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    5.200849] ehci-platform 1c1c000.usb: irq 33, io mem 0x01c1c000
[    5.218414] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    5.218666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.218674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.218679] usb usb2: Product: EHCI Host Controller
[    5.218685] usb usb2: Manufacturer: Linux 4.4.24-bananian ehci_hcd
[    5.218690] usb usb2: SerialNumber: 1c1c000.usb
[    5.219527] hub 2-0:1.0: USB hub found
[    5.219596] hub 2-0:1.0: 1 port detected
[    5.220459] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[    5.220495] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[    5.220746] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400
[    5.282637] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.282645] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.282651] usb usb3: Product: Generic Platform OHCI controller
[    5.282656] usb usb3: Manufacturer: Linux 4.4.24-bananian ohci_hcd
[    5.282662] usb usb3: SerialNumber: 1c14400.usb
[    5.283507] hub 3-0:1.0: USB hub found
[    5.283561] hub 3-0:1.0: 1 port detected
[    5.284366] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    5.284402] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    5.284644] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400
[    5.342618] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.342627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.342633] usb usb4: Product: Generic Platform OHCI controller
[    5.342638] usb usb4: Manufacturer: Linux 4.4.24-bananian ohci_hcd
[    5.342644] usb usb4: SerialNumber: 1c1c400.usb
[    5.343549] hub 4-0:1.0: USB hub found
[    5.343606] hub 4-0:1.0: 1 port detected
[    5.344575] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    5.344993] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    5.344999] musb-hdrc: MHDRC RTL version 0.0
[    5.345014] musb-hdrc: 11/11 max ep, 5184/8192 memory
[    5.345144] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    5.345155] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
[    5.345642] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    5.345650] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.345656] usb usb5: Product: MUSB HDRC host driver
[    5.345661] usb usb5: Manufacturer: Linux 4.4.24-bananian musb-hcd
[    5.345677] usb usb5: SerialNumber: musb-hdrc.1.auto
[    5.346461] hub 5-0:1.0: USB hub found
[    5.346518] hub 5-0:1.0: 1 port detected
[    5.752223] ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC39P, max UDMA/133
[    5.763108] ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    5.774819] ata1.00: configured for UDMA/133
[    5.783594] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 C39P PQ: 0 ANSI: 5
[    5.800658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.805215] vcc3v0: disabling
[    5.805227] vcc5v0: disabling
[    5.805706] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    5.805979] sd 0:0:0:0: [sda] Write Protect is off
[    5.805990] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.806105] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.847288]  sda: sda1
[    5.848859] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.864161] usb0-vbus: disabling
[    5.912016] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    5.927201] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    5.975815] devtmpfs: mounted
[    5.983313] Freeing unused kernel memory: 488K (c0a0e000 - c0a88000)
[    6.297388] random: systemd: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
[    6.320669] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.342944] systemd[1]: Detected architecture 'arm'.
[    6.472925] systemd[1]: Set hostname to <pi>.
[    6.708485] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 20 bits of entropy available)
[    7.030927] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    7.050161] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    7.069431] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    7.105150] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    7.124553] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    7.143554] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    7.229924] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[    7.250996] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[    7.324277] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[    7.345017] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[    7.508008] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.541987] systemd[1]: Expecting device dev-ttyS0.device...
[    7.559292] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.577852] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.596390] systemd[1]: Starting Remote File Systems (Pre).
[    7.613537] systemd[1]: Reached target Remote File Systems (Pre).
[    7.625424] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.651681] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.672153] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.691322] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.710197] systemd[1]: Starting Paths.
[    7.725114] systemd[1]: Reached target Paths.
[    7.734837] systemd[1]: Starting Encrypted Volumes.
[    7.750384] systemd[1]: Reached target Encrypted Volumes.
[    7.760988] systemd[1]: Starting Root Slice.
[    7.775611] systemd[1]: Created slice Root Slice.
[    7.785267] systemd[1]: Starting User and Session Slice.
[    7.800684] systemd[1]: Created slice User and Session Slice.
[    7.811228] systemd[1]: Starting Delayed Shutdown Socket.
[    7.826330] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.836768] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.853138] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.864773] systemd[1]: Starting Journal Socket (/dev/log).
[    7.879880] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.890421] systemd[1]: Starting udev Control Socket.
[    7.904830] systemd[1]: Listening on udev Control Socket.
[    7.914791] systemd[1]: Starting udev Kernel Socket.
[    7.928807] systemd[1]: Listening on udev Kernel Socket.
[    7.938471] systemd[1]: Starting Journal Socket.
[    7.951839] systemd[1]: Listening on Journal Socket.
[    7.961032] systemd[1]: Starting System Slice.
[    7.973873] systemd[1]: Created slice System Slice.
[    7.982781] systemd[1]: Starting system-getty.slice.
[    7.996248] systemd[1]: Created slice system-getty.slice.
[    8.005712] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.020226] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.030798] systemd[1]: Starting Increase datagram queue length...
[    8.069261] systemd[1]: Starting Restore / save the current clock...
[    8.089981] systemd[1]: Starting udev Coldplug all Devices...
[    8.109605] systemd[1]: Mounting POSIX Message Queue File System...
[    8.141091] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.168268] systemd[1]: Mounting Debug File System...
[    8.186584] systemd[1]: Mounted Huge Pages File System.
[    8.206559] systemd[1]: Started Set Up Additional Binary Formats.
[    8.233556] systemd[1]: Starting Load Kernel Modules...
[    8.251313] systemd[1]: Starting Slices.
[    8.264218] systemd[1]: Reached target Slices.
[    8.273369] systemd[1]: Expecting device dev-sda1.device...
[    8.294839] systemd[1]: Mounted Debug File System.
[    8.308884] systemd[1]: Mounted POSIX Message Queue File System.
[    8.325390] systemd[1]: Started Increase datagram queue length.
[    8.333574] fuse init (API version 7.23)
[    8.367519] systemd[1]: Started Restore / save the current clock.
[    8.417260] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.442892] systemd[1]: Started Load Kernel Modules.
[    8.455724] systemd[1]: Time has been changed
[    8.540939] systemd[1]: Started udev Coldplug all Devices.
[    8.606323] systemd[1]: Mounting FUSE Control File System...
[    8.649049] systemd[1]: Starting Apply Kernel Variables...
[    8.667631] systemd[1]: Mounted Configuration File System.
[    8.677914] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.696529] systemd[1]: Starting Syslog Socket.
[    8.710700] systemd[1]: Listening on Syslog Socket.
[    8.719996] systemd[1]: Starting Journal Service...
[    8.742202] systemd[1]: Started Journal Service.
[    8.895502] systemd-udevd[162]: starting version 215
[    9.398575] sun4i-ss 1c15000.crypto-engine: no reset control found
[    9.410025] sun4i-ss 1c15000.crypto-engine: Die ID 0
[    9.608506] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[   11.108190] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   11.373275] systemd-journald[160]: Received request to flush runtime journal from PID 1
[   11.889842]  RX IPC Checksum Offload disabled
[   11.899020]  No MAC Management Counters available
[   15.878872] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx


Edited by Filiphch at Oct 28, 2016 09:28

I guess by moving to new 'booter' the system doesn't mount anything (writable)You could (temp) solve it with:
mount -o remount,rw /

Solved for myself, just sharing
Anybody with better solution?

  1. nano /etc/fstab
Copy the Code

Mount here your root partition
  1. UUID="YOUR DEVICE ID" / ext4 defaults 0 0
Copy the Code

How to find your UUID:
  1. lsblk --output NAME,FSTYPE,LABEL,UUID,MODE
Copy the Code

Yoyo

You have to log in before you can reply Login | Sign Up

Points Rules