C/C++

Bare metal clock and timers tutorial for banana pi

1 129
Edited by inaciose at Jul 23, 2017 11:33

Hello

Im trying to learn as hobby how to make baremetal programing on banana pi.

To begin I take this tutorial and made it in banana pi
http://wiki.osdev.org/ARM_RaspberryPi_Tutorial_C

Then I add the getc and made an echo shell (just show what you type in serial port);
After that i blink a led using a loop delay function;

Then i try to blink the led with interrups. I got stuck here. Im not smart enought to figure if for my self.
There is no simple information or simple code sample about clok control and timers on banana pi, and allwinner A20.
Then i try to see if i cant get the code from else here. U-boot code was my first try. But it is not simple enough get how to do it.

So.. i need some help to get this done.
Any one knows where to get a simple code sample or tutorial about clock control, timers and interrupts on banana pi / A20

Thanks


At github there is a small sample with only a few files.

https://github.com/dwelch67/raspberrypi/blob/master/blinker05/

I cant find anything simple like this to bananapi. So I try to find the memory addresses on bananapi, but certanly i need to get smart because i didn't find any.

So I kindly ask if any one knows the banana pi addresses to match these ones.

define ARM_TIMER_LOD 0x2000B400
define ARM_TIMER_VAL 0x2000B404
define ARM_TIMER_CTL 0x2000B408
define ARM_TIMER_CLI 0x2000B40C
define ARM_TIMER_RIS 0x2000B410
define ARM_TIMER_MIS 0x2000B414
define ARM_TIMER_RLD 0x2000B418
define ARM_TIMER_DIV 0x2000B41C
define ARM_TIMER_CNT 0x2000B420
define SYSTIMERCLO 0x20003004
define GPFSEL1 0x20200004
define GPSET0 0x2020001C
define GPCLR0 0x20200028
define IRQ_BASIC 0x2000B200
define IRQ_PEND1 0x2000B204
define IRQ_PEND2 0x2000B208
define IRQ_FIQ_CONTROL 0x2000B210
define IRQ_ENABLE_BASIC 0x2000B218
define IRQ_DISABLE_BASIC 0x2000B224

You have to log in before you can reply Login | Sign Up

Points Rules