Bananian

freezing under high load

6 5030
gbi  
Hi All,

I'd like to ask, there are some reports that the BaPi freezes under high network load, for instance

http://cbwebs.de/single-board-co ... k-when-cpu-is-busy/

or

http://forum.lemaker.org/viewthread.php?tid=1792

but they seem to use RaspBian (which is not optimized for the CPU of the BaPi)

This leads me to the obvious question . What about Bananian and high network load, is the BaPi also freezing ?

Thanks in advance
Post Last Edited by freester at 2014-9-17 10:31

Post Last Edited by hundehuette at 2014-8-21 05:49

Hi faggot,

Get the new Bananian Linux. No problem with high loads anymore.
Nico did awesome work on avoiding these shit!

Read first, spam later!

Reply 1# gbi
This is sometimes caused by the old kernel config.

gbi  
Thanks Tony,

@all: in this review

http://www.linuxuser.co.uk/revie ... tier-than-raspberry

the reviewer claims that thruput of the NIC is only 233 MBit/s, which is far away from the 1Gbit which is theoretically possible.

So my next question, has anybody done some thruput measuring with a recent kernel, how much traffic the GBit NIC is able to handle ? Should not be to complicated with iperf, netperf or Jmeter.

Thanks in advance

Reply 4# gbi

I have read this article about a month ago. 233 is really far away from 1GB. But gmac speed is effected by many issues. I remembered that I have seen a 300+M test on Banana Pi, but I forgot where.

Reply 4# gbi

But it is really more faster than Raspberry Pi..

You have to log in before you can reply Login | Sign Up

Points Rules