Bananian
OTG support by Bananian
14
13074
|
|
sashijoseph replied at Sat Aug 30, 2014 12:15 
Reply 7# markodeablo
Hi Mark..
So let me see if I have this straight. We are using Raspbian on the Banana pi. So, if I replace the script.bin file with the one in the tar, this will enable the OTG port? I don't need to recompile the kernel? |
|
|
|
|
|
|
|
|
|
|
|
use bananian-config to enable OTG  |
|
|
|
|
|
|
|
|
|
|
|
I realize this is resurrecting an old thread, but as an FYI, the current bananian-config does not mention anything about the OTG port. Is there another way to config the port to be used like a standard USB port? Or is the previously mentioned script the only method?
Thanks for any suggestions. |
|
|
|
|
|
|
|
|
|
|
|
I had the same question, but I found out the current "bananian-config" script actually is able to enable OTG.
- # bananian-config
- [...]
- Your current hardware configuration is: BananaPi
- Do you want to change it? (y/N) y
- Hardware configuration has been set to: BananaPi-OTG. Please reboot your system!
- # shutdown -r now
|
|
|
|
|
|
|
|
|
|
[Copy link]
Post time Dec 12, 2014 20:57
Post time Dec 13, 2014 05:36
