Banana Pi BPI-F2P with SunPlus SP7021 chip design for Industrial control gateway

0 592
Edited by webduino at Apr 30, 2020 00:15

Banana Pi BPI-F2P with SunPlus SP7021 chip design for Industrial control gateway

Banana PI BPI-F2P 2.JPG

hardware spec:

1. SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM.
2. Storage – 8GB eMMC flash, microSD card slot
3. Video Output – HDMI 1.4 output
4. Camera I/F – MIPI CSI connector
5. Connectivity – 2x 10/100M Ethernet
6. USB – 2x USB 2.0 host ports, 1x micro USB port
7. 2 USB header interface
8. 40-pin GPIO header compatible
9. 7.4V Lithium battery power supply interface
10. RTC battery interface
11. PoE function support via PoE module
12. Debugging – 3-pin header for UART console, SWD ICE port
13. Security – TPM 2.0 via ST33TPH2EI2C secure element
14. Misc – Power switch, reset button, boot selection dip switch
15. Power Supply – 12VDC via power barrel jack
16. Dimensions :
17. Temperature Range – -40C ~ +85°C

Hardware interface:

Banana PI BPI-F2P interface 750.jpg

with Heat sinks ,PoE module  and RTC battery on board :

Banana PI BPI-F2P 9.jpg

we will keep update document on wiki page:

http://wiki.banana-pi.org/Banana_Pi_BPI-F2P

Banana PI BPI-EAI80 interface 750.JPG
You have to log in before you can reply Login | Sign Up

Points Rules