Trouble

Start problem

2 2950
Bijiabo  
Why I can't run it after I pushed the PWR button? There is no LED light changed,and I can't find it's IP in router's list.And I have write the Raspberry Pi system for banana pi to the SD card.
Maybe you should check if the SD card has broken, not noly the micro-sd card, but also the standard SD card cover.
The power led should be red when the power has been connected.

mark  
Hey there, I can boot into the system following the guide:
http://www.lemaker.org/quick_start_guide.html
image I am using is:
http://pan.baidu.com/s/1gdmSoxX

The system should start after power on

You have to log in before you can reply Login | Sign Up

Points Rules