Discussion

How to connect a 7" hd TFT lcd panel - lvds

4 10436
I would like to connect a 7" hd TFT lcd panel - AT070TNA2 V.1  using its lvds connector connecting to con2 of Banana pi . Can anyone assist me in the changes that need to be done to fex file.


Thanks in advance.
Reply 1# subajawa

You can refer to  here http://forum.lemaker.org/viewthread.php?tid=30&extra=page%3D1

to see the pin definitons
, and refer to cubieboard2 fex config

Reply 1# subajawa
Hi,
Did you succeed with this display ?
Thanks

nickyng  
Reply  subajawa

You can refer to  here

to see the pin definitons
, and refer to cubieboard2 fex ...
tony_zhang Posted at 2014-5-26 20:39

Hi,

pardon for a nobie query as I am still new with this Banana-Pi stuff...

... I hv got a 10" TFT touchscreen panel that I ripped out of my old tablet...it has got the flexi-cable that fit the CON2 of Banana Pi, I hv plugged it in and bootup with the Android V2 image...it seems to be booting as I can see on the BananaPi that the RED LED is on and the GREEN LED flashing on and off repeatedly....BUT my TFT touchscreen panel is  still BLANK !!

Do I need to configure or meddle with any pin settings on the Banana Pi motherboard ??

Any help or pointers will be greatly appreciated ...again..

Josh  
Hello,
I'm doing something wrong, can you please help me with this display:
http://www.vslcd.com/Specification/AT070TNA2.pdf

THX

You have to log in before you can reply Login | Sign Up

Points Rules