WIKI & GitHub not working

32 11447
Edited by winuser at Sat Nov 1, 2014 02:52

Ok, we are using the computer now.

Continuing from where we left:-

following your wiki:- /fex2bin Bananapi.fex script.bin

mark@mark-Lubuntu:~/toolchain/sunxi-tools$ /fex2bin Bananapi.fex script.bin
bash: /fex2bin: No such file or directory

following the sunxi wiki:- ./fex2bin Bananapi.fex script.bin                 
(the dot "." before the slash "/" is missing in your wiki)

mark@mark-Lubuntu:~/toolchain/sunxi-tools$ ./fex2bin Bananapi.fex script.bin
The script.bin file can be found in the sunxi-tools dir

So recapping, the changes that need to be made to your wiki for a new install of 14.04 in the script.bin run

1) sudo apt-get install pkg-config                (this is specifically stated in the sunxi wiki)
2) sudo apt-get install gcc-4.8-arm-linux-gnueabihf-base         and
     sudo apt-get install g++-4.8-arm-linux-gnueabihf              
     (Thanks to silentcreek for observing this in his run of the script.bin)
3) to use the correct command - "./fex2bin Bananapi.fex script.bin" instead of leaving out the dot "." before the slash "/", as in the wiki right now.

This leads to the successful conclusion of the script.bin run.

Edited by tony_zhang at Sat Nov 1, 2014 05:55
winuser replied at Sat Nov 1, 2014 02:07
Ok, we are using the computer now.

Continuing from where we left:-

OK. My fault missing the dot ". " But you may find that I use:
  1. {sunxi-tools}/fex2bin BananaPi.fex script.bin
Copy the Code
there is {sunxi-tools} to indicate the path of fex2bin. So for example, if I am in home directory, I may need type:
  1. bananapro-bsp/sunxi-tools/fex2bin BananaPi.fex script.bin
Copy the Code
So I use the {sunxi-tools} to indicate it, it depends on your own tools path.

If there are many sad stories, share it with the people you trust. Sharing helps people get closer together and you also relieve some of that sadness.
Red Ball

You have to log in before you can reply Login | Sign Up

Points Rules