Edited by banana5001 at Sat Oct 25, 2014 13:29 |
I got my first Banana Pi today and followed the instructions to create the SD card. I did an md5sum on the .img. Everything OK.
The output on my TV is "no video signal". I installed Lubuntu on the card from my Ubuntu System.
Intenso 32GB SDHC UHS-I (Ultra High Speed) card class 10
I use Samsung Note 2 power supply 5v/2A
I tried an HDMI with ethernet and an HDMI cable without ethernet. Neither one works. No Video Signal.
Network cable connected to router and the network LEDs on the banana are blinking.
Red LED is on and green on blinking.
Already tried for nearly 3 hours without success. Any idea? Copy the Code
- Disk /dev/sdb: 32.4 GB, 32395755520 bytes
- 64 heads, 32 sectors/track, 30895 cylinders, total 63272960 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk identifier: 0x0c2452d7
- Device Boot Start End Blocks Id System
- /dev/sdb1 2048 104447 51200 83 Linux
- /dev/sdb2 104448 7167999 3531776 83 Linux
I wrote the image Lubuntu_For_BPI_V3.1 to the card. Is that correct? How do I know what version of the Banana Pi board I have? On the board it only says