Other OS

Idle load : usb-hardware-sc

6 2835

I'm using raspbian last version.

I have a load to 1.0 1.0 1.0 when banana pi is idle.

I have find the process usb-hardware-sc with D state. It seems to be this process which create this load.

Any ideas to correct it ?

Someone have the same issue ?

I think I have found.

Need to modify this parameters in bananapi.fex file

In [usbc0], change usb_detect_type = 0

Recreate the script.bin file and reboot.

That's why I use a different OTG config in Bananian:
https://github.com/Bananian/fex/ ... 8e1ce6efda60fa03cbb

This one works fine for USB 1.0 and 2.0 without any D state processes.

Edited by chrisprols at Wed May 13, 2015 15:10

where is this bananian.fex file ?

could you be a bit more precise on how to edit the file, how to recreate the script, etc.

Thanks a lot !!!

upper bumper !


Google is your friend:
http://www.bananapi.com/index.ph ... the-script-bin-file

bananapi@lemaker ~ $ sudo apt-get install libusb-1.0-0-dev
bananapi@lemaker ~ $ git clone https://github.com/linux-sunxi/sunxi-tools
bananapi@lemaker ~/sunxi-tools $ make
bananapi@lemaker ~ $ sunxi-tools/bin2fex /boot/script.bin bananapi.fex
bananapi@lemaker ~ $ cat bananapi.fex

No need to compile the sunxi-tools with Bananian any longer: https://dev.bananian.org/view.php?id=60

And the fex files for usage with HDMI can be found here: https://github.com/linux-sunxi/s ... ster/sys_config/a20

And the ones for use with LCDs here: https://github.com/LeMaker/fex_configuration/tree/master/fex

You have to log in before you can reply Login | Sign Up

Points Rules