Lubuntu

Lubuntu_For_BananaPi_v3.0 Where?

11 5951
xefil  
Hello,

I was ready to download a Lubuntu image from Downloads section and I've seen there is 'Lubuntu_For_BananaPi_v3.0' ready but not linked for download. Is it available somewhere?

Thank you!

Simon
xefil  
Sorry.... my fault... found..... OPS

The google drive, dropbox, onedrive, kingsoft and others can all download from.

xefil  
The google drive, dropbox, onedrive, kingsoft and others can all download from.
tony_zhang Posted at 2014-7-2 07:48


Seen two seconds after posted the message, sorry ;)

hjoe  
Reply 3# tony_zhang


According to the wiki:
"The SSH server is installed by default and starts with boot on Raspbian for Banana Pi and Lubuntu for Banana Pi operating system."

But after installing the SD card with the newly downloaded and flashed image it seems that the ssh server is not running.
The BananaPi boots and answers ping requests
PING 192.168.2.112 (192.168.2.112) 56(84) bytes of data.
64 bytes from 192.168.2.112: icmp_seq=1 ttl=64 time=0.276 ms
64 bytes from 192.168.2.112: icmp_seq=2 ttl=64 time=0.257 ms
64 bytes from 192.168.2.112: icmp_seq=3 ttl=64 time=0.226 ms

but
ssh root@192.168.2.112
ssh: connect to host 192.168.2.112 port 22: Connection refused

A nmap network scan results in:
Nmap scan report for bbb (192.168.2.112)
Host is up (0.00019s latency).
All 1000 scanned ports on bbb (192.168.2.112) are closed

What I'm doing wrong?

PS
I don't have a HDMI monitor to connect.

hjoe  
Reply 5# hjoe


    it is the Lubuntu 3.0 image Lubuntu_1404_For_BananaPi_v3.0.tgz

Sander  
On v3.0 openssh-server is not installed (anymore) by default.

A quick idea on how you can fix it, if you don't have a HDMI monitor:
If you can mount the SD card in a Linux distro, Ubuntu Live CD or w/e, and you can edit the /etc/rc.local file, you may be able to add:
apt-get -y install openssh-server, just before the exit 0;

Boot the Banana PI, and openssh will, hopefully, be installed during boot.

Reply 5# hjoe

Sorry, the wiki is based on v2.0

hjoe  
Reply 7# Sander
    will try it later, because of the #wm2014, may be tomorrow.

Heinz

hjoe  
Reply 7# Sander


I have added the apt-get install in rc.local but, as I had assumed, it not automatically starts the ssh server.
If you have some more advice, you are welcome.
May be the best is starting with a HDMI Display.

You have to log in before you can reply Login | Sign Up

Points Rules