Bananian

Bananian boot from /dev/sda1

4 2348
Hi
Previously I used Raspbian on my device. I set boot from HDD and all worked fine. Now I try to run Bananian from HDD, and it works only in half. When I use 8 GB card (on which I burned ISO) with changed uEnv.txt all works fine. But when I try to run it from my old cards (256MB and 2GB) it stays dead. I copy all from burned 8 GB card (script.bin, uEnv.txt, uImage, together 7 files). Could you tell me what I am doing wrong? Or mayby you make a small IMG file which I can burn to small 256MB card and it will provide only boot from /dev/sda1?
Hi,

you need to copy U-Boot to the SD card too.
See http://wiki.lemaker.org/Setting_up_the_bootable_SD_card

And for compilung U-Boot:
http://wiki.lemaker.org/Building_u-boot,_script.bin_and_linux-kernel

Bananian replied at Sat Nov 22, 2014 06:32
Hi,

you need to copy U-Boot to the SD card too.

Could you send me ready compiled u-boot-sunxi-with-spl.bin file and other? Becouse I don't have oportunity to compile it myself (I don't have PC with Linux, and compiling it on Raspberry will take a long time). Can you do that for me? ;)

See attachment of this post. It' the one from Bananian 14.09/14.11.

u-boot-sunxi-with-spl.bin.zip

133.76 KB, Downloads: 66

Bananian replied at Sun Nov 23, 2014 04:40
See attachment of this post. It' the one from Bananian 14.09/14.11.

Thanks! Now all works fine ;).

You have to log in before you can reply Login | Sign Up

Points Rules