Other OS

OTG-definition in script.bin (actual archlinux from lemaker) causing high load

0 2227
7o9  
Edited by 7o9 at Sun Jan 11, 2015 14:30

Hi,
i was surprised that my system (Banana Pi Pro), in idle mode, shows a load average  of 1.01.

It seems that the included script.bin in the image (for the pro) is buggy, in terms of definitions of usbc0:
  1. [usbc0]
  2. usb_used = 1
  3. usb_port_type = 2
  4. usb_detect_type = 1
  5. usb_id_gpio = port:PH03<0><1><default><default>
  6. usb_det_vbus_gpio = port:PH26<0><0><default><default>
  7. usb_drv_vbus_gpio = port:PB09<1><0><default><0>
  8. usb_restrict_gpio =
  9. usb_host_init_state = 0
  10. usb_restric_flag = 0
  11. usb_restric_voltage = 3550000
  12. usb_restric_capacity = 5
Copy the Code
Shouldn't it be "usb_restric_gpio" (without _t_) instead of the above definition, and some port definitions behind this, like mentioned here: http://wiki.lemaker.org/index.ph ... ing_USB_OTG_Driver?  But banana pi pro seems to use other ports.
Somebody now where to find?

At the moment, i changed usb_detect_type to 0, now my load average in idle is down to 0,01,  but i guess OTG will not work :-)

Bye
You have to log in before you can reply Login | Sign Up

Points Rules