Enable sch_netem kernel module

5 2907

I am trying to emulate network latency on a Banana Pi using the command:
  1. tc qdisc add dev eth0 root netem delay 100ms
Copy the Code
but I am getting the following message:
  1. RTNETLINK answers: No such file or directory
Copy the Code

It seems that the sch_netem kernel module is not enabled, as when I run:
  1. modprobe sch_netem
Copy the Code
I get:
  1. modprobe: FATAL: Module sch_netem not found.
Copy the Code

Does anyone know how it can be enabled?


Enabled on our kernel 4.9.7

In case you have normal Banana:

I am using a Banana Pi R1, which is running Bananian 16.04.

Edited by igorpec at Feb 04, 2017 10:53

And yet another reason why it's better to use Armbian on R1: ... stribution/?p=24625
If you want to know more technical details, check this conversation:

I should state I motivated with your work. I needed to scrutinize such kind of article which is one of these, I've found here a lot of entrancing information. this site ideal for the understanding I need.  
No.1 Escorts in Delhi

I am cheery to be here and this splendid article. I've found here a lot of interesting information on the knowledge I need. all that you provide for us, it was very valuable and supportive, you shake for sharing this astonishing post.  
Independent Delhi Escorts
Delhi Escorts

You have to log in before you can reply Login | Sign Up

Points Rules